Massey Ferguson 178

The Massey Ferguson 178 is a tractor produced by Massey Ferguson. It is equipped with a 247.8 ci 4.1 L engine. The listed engine power is Diesel (listed): 73 hp / 54.4 kW. Transmission: Multi Power. Operating weight: 6878 to 7760 pounds.

Engine Power

Diesel (listed): 73 hp / 54.4 kW

Fuel & Capacities

21.7 gal 82.1 L

Transmission

Multi Power

Operating Weight

6,878 lbs (2WD) 3119 kg

Overview

	1968 - 1971

Production
Manufacturer	Massey Ferguson

Massey Ferguson 178 Engine
Perkins 4.1L 4-cyl diesel
Fuel tank	21.7 gal 82.1 L
Engine details ...

Massey Ferguson 178 Power
Engine	73 hp 54.4 kW
PTO (claimed)	62 hp 46.2 kW

Mechanical
Two- or four-wheel drive
Steering	power assist
Dry disc brakes
Open operator station.

Hydraulics
Valves	1 or 2
Pump flow	3.1 gpm (gear) 11.7 lpm
	8.1 gpm (Multi Power) 30.7 lpm

Tractor hitch
Rear Type	II
Rear lift	3,900 lbs 1769 kg

Power Take-off (PTO)
Rear PTO Type	540/ground

Dimensions & Tires
Wheelbase	84 inches 213 cm
Weight	6878 to 7760 pounds
Front tire	7.5x16
Rear tire	12x36
Full dimensions and tires ...

Engine

Engine Detail — 247.8 ci / 4.1 L Diesel

Manufacturer	Perkins A4.248
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	247.8 ci 4.1 L
Bore/Stroke	3.975x5.00 inches 101 x 127 mm
Power	73 hp 54.4 kW
Compression	16:1
Rated RPM	2000
Torque	212 lb-ft 287.5 Nm
Torque RPM	1300
Starter type	electric
Oil capacity	15 qts 14.2 L
Coolant capacity	28.8 qts 27.3 L

Transmission

Transmission options
12-speed partial powershift
6-speed unsynchronized
8-speed unsynchronized

Transmission — Multi Power

Transmission	Multi Power
Type	partial powershift
Gears	12 forward and 4 reverse

Transmission — 6 forward and 2 reverse unsynchronized

Type	unsynchronized
Gears	6 forward and 2 reverse

Transmission — 8 forward and 2 reverse unsynchronized

Type	unsynchronized
Gears	8 forward and 2 reverse

Dimensions

Massey Ferguson 178 Tires
Ag front	7.5x16
	6x19
	7.5x16
Ag rear	12x36
	15x30
	12x38
	14x30

Dimensions
Wheelbase	84 inches 213 cm
Length	136 inches 345 cm
Width	72 inches 182 cm
Height (steering wheel)	67 inches 170 cm
Operating weight	6,878 lbs (2WD) 3119 kg
	7,760 lbs (4WD) 3519 kg
Ground clearance	17.5 inches 44 cm

Photos

Massey Ferguson 178 with four-wheel drive.

Two-wheel drive Massey Ferguson 178.

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 178 based on its 73 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 178.

Estimated Continuous Field Runtime: 5.7 hrs

Approximately 5.7 hours of continuous field operation at ~75% rated power on a full tank (21.7 gal / 82.1 L).

Estimated 75% Load Fuel Burn~3.8 gal/hr (14.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours