Massey Ferguson 2805

The Massey Ferguson 2805 is a tractor produced by Massey Ferguson. It is equipped with a 640 ci 10.5 L engine. The listed engine power is 190.81 hp 142.3 kW. Transmission: Multi-Power. Operating weight: 13500 to 16035 pounds.

Engine Power

190.81 hp 142.3 kW

Fuel & Capacities

87 gal 329.3 L

Transmission

Multi-Power

Operating Weight

13500 to 16035 pounds

Overview

	1978 - 1983 2000 SeriesRow-Crop tractor 2000 Series Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor
Original price was $60,200 in 1983

Massey Ferguson 2805 Engine
Perkins 10.5L 8-cyl diesel
Fuel tank	87 gal 329.3 L
Engine details ...

Massey Ferguson 2805 Power
PTO (claimed)	190 hp 141.7 kW
Drawbar (tested)	160.48 hp 119.7 kW
PTO (tested)	194.62 hp 145.1 kW
Performance test details ...

Mechanical
Two-wheel drive
Final drives	planetary
Steering	hydrostatic power
Hydraulic wet disc brakes
Cab standard with air-conditioning. Available platform configuration with four-post ROPS.

Hydraulics
Type	open center
Valves	2 or 3
Pump flow	16.5 gpm (high-pressure) 62.5 lpm
	6.4 gpm (low-pressure) 24.2 lpm
	16.5 gpm (aux. high-pressure) 62.5 lpm
Steering flow	5.5 gpm 20.8 lpm

Tractor hitch
Rear Type	III/II
Control	position control and lower-link draft sensing

Power Take-off (PTO)
Rear PTO	independent
Clutch	hydraulic
Rear PTO Type	1000 (1.375)
Engine RPM	1000@2090

Dimensions & Tires
Wheelbase	110 inches 279 cm
Weight	13500 to 16035 pounds
Front tire	11.00-16
Rear tire	20.8-38
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	58
Batteries	2
Battery volts	12

References

Loaders and Spreaders published in 1979, by Massey Ferguson
MF 2000 Series Tractors published in 1982, by Massey Ferguson

Engine

Engine Detail — 640 ci / 10.5 L Diesel

Manufacturer	Perkins ATV8.640
Configuration	turbocharged diesel, 8-cylinder, liquid-cooled
Displacement	640 ci 10.5 L
Bore/Stroke	4.63x4.75 inches 118 x 121 mm
Fuel system	direct injection
Air cleaner	dual dry element
Compression	16:1
Rated RPM	2500
Starter	electric
Starter volts	12
Oil capacity	24 qts 22.7 L
Coolant capacity	55 qts 52.1 L

Transmission

Transmission options
24-speed 3-speed power shift
8-speed mechanical shuttle

Transmission — Multi-Power

Transmission	Multi-Power
Type	3-speed power shift
Gears	24 forward and 6 reverse
Clutch	356mm dual cerametallic dry disc
Oil capacity	120 qts 113.6 L
Eight forward gears with three power shift speeds in each gear.
With 18.4x38 rear tires.

Transmission — 8 forward and 6 reverse mechanical shuttle

Type	mechanical shuttle
Gears	8 forward and 6 reverse
Clutch	356mm dual cerametallic dry disc
With 18.4x38 rear tires.

Dimensions

Massey Ferguson 2805 Tires
Ag front	11.00-16
Ag rear	20.8-38

Dimensions
Wheelbase	110 inches 279 cm
Length	190 inches 482 cm
Width	91.6 inches (standard axle) 232 cm
	125.7 inches (long axle) 319 cm
	156.9 inches (extra-long axle) 398 cm
Clearance (front axle)	25.4 inches 64 cm
Clearance (drawbar)	15.7 inches 39 cm
Rear axle	3.75 inch diameter 95 mm
Front tread	60 to 80 inches 152 to 203 cm
Front tread	70 to 90 inches 177 to 228 cm (wide axle)
Rear tread	71 to 92 inches 180 to 233 cm (standard)
Rear tread	62 to 95 inches 157 to 241 cm (PAVT standard)
Rear tread	71 to 126 inches 180 to 320 cm (long)
Rear tread	62 to 129 inches 157 to 327 cm (PAVT long)
Rear tread	71 to 161 inches 180 to 408 cm (extra-long)
Rear tread	62 to 165 inches 157 to 419 cm (PAVT extra-long)

Massey Ferguson 2805 Weight
Shipping	13500 lbs 6123 kg
Operating	16035 lbs 7273 kg
Ballasted	21430 lbs 9720 kg

Massey Ferguson 2805 Height
Steering wheel	87.2 inches 221 cm
Hood	72.9 inches 185 cm
Cab	112.1 inches 284 cm

Tests

Tractor Tests
NTTL 1258: diesel 24-speed 2WD
NTTL 1399: diesel 8-speed 2WD

Nebraska Tractor Test 1258
Diesel 24-speed 2WD October 7 - 13, 1977 Link: Nebraska Tractor Test 1258 file
PTO performance
Power at rated engine speed	194.62 hp 145.1 kW
Fuel use	13.3 gal/hour 50.3 l/hour
Power at rated PTO speed	181.77 hp 135.5 kW
Fuel use	11.2 gal/hour 42.4 l/hour
Drawbar performance
Max power	157.98 hp 117.8 kW
Gear 5I used for power test.
Max pull	17369 lbs 7878 kg
Gear 3I used for pull test.

Nebraska Tractor Test 1399
Diesel 8-speed 2WD June 18, 1984 - June 24, 1981 Link: Nebraska Tractor Test 1399 file
PTO performance
Power at rated engine speed	190.81 hp 142.3 kW
Fuel use	13.0 gal/hour 49.2 l/hour
Power at rated PTO speed	186.29 hp 138.9 kW
Fuel use	11.2 gal/hour 42.4 l/hour
Drawbar performance
Max power	160.48 hp 119.7 kW
Fuel use	12.9 gal/hour 48.8 l/hour
Gear 5 used for power test.
Max pull	17647 lbs 8004 kg
Gear 3 used for pull test.

Photos

Massey Ferguson 2805

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 2805 based on its 190.81 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 2805.

Estimated Continuous Field Runtime: 8.8 hrs

Approximately 8.8 hours of continuous field operation at ~75% rated power on a full tank (87 gal / 329.3 L).

Estimated 75% Load Fuel Burn~9.9 gal/hr (37.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours