Massey Ferguson 283

The Massey Ferguson 283 is a tractor produced by Massey Ferguson. It is equipped with a 248 ci 4.1 L engine. The listed engine power is Diesel (listed): 89 hp / 66.4 kW. Transmission: 8 forward and 2 reverse. Operating weight: 5,432 lbs 2463 kg.

Engine Power

Diesel (listed): 89 hp / 66.4 kW

Fuel & Capacities

21.7 gal 82.1 L

Transmission

8 forward and 2 reverse

Operating Weight

5,432 lbs 2463 kg

Overview

	1985 - 1999 200 SeriesUtility tractor 200 Series Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor
Factories	Coventry, England
	Brazil
Original price	$21,000 (1997)

Massey Ferguson 283 Engine
Perkins 4.1L 4-cyl diesel
Engine details ...

Massey Ferguson 283 Transmission
8-speed sliding gear
Transmission details ...

Massey Ferguson 283 Power
Engine	89 hp 66.4 kW
PTO (claimed)	67 hp 50.0 kW

Mechanical
Two- or four-wheel drive
Steering	hydrostatic power
Wet disc brakes
Two-post ROPS.

Capacity
Fuel	21.7 gal 82.1 L
Hydraulic system	10.8 gal 40.9 L

Hydraulics
Type	open center
Capacity	10.8 gal 40.9 L

Tractor hitch
Rear Type	II
Control	position and draft control

Power Take-off (PTO)
Rear PTO	live (two-stage clutch)
Rear PTO Type	540

Dimensions & Tires
Wheelbase	84.3 inches 214 cm
Weight	5,432 lbs 2463 kg
Front tire	7.50-16
Rear tire	18.4-30
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

Loaders - Compact and Agricultural published in 1989, by Massey Ferguson
Loaders - Compact and Agricultural published in 1989, by Massey Ferguson
MF 200 Series published in 1994, by Massey Ferguson

Engine

Engine Detail — 248 ci / 4.1 L Diesel

Manufacturer	Perkins A4.248
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	248 ci 4.1 L
Power	89 hp 66.4 kW
Rated RPM	2200
Starter volts	12
Coolant capacity	15.2 qts 14.4 L

Transmission

Transmission — 8 forward and 2 reverse sliding gear

Type	sliding gear
Gears	8 forward and 2 reverse
Tractor must be stopped, and clutch used, to shift gears.

Dimensions

Massey Ferguson 283 Tires
Ag front	7.50-16
Ag rear	18.4-30

Dimensions
Wheelbase	84.3 inches 214 cm
Length	145.6 inches 369 cm
Width	79.3 inches 201 cm
Height (ROPS)	99.5 inches 252 cm
Weight	5,432 lbs 2463 kg
Ground clearance	16.3 inches 41 cm

Photos

Massey Ferguson 283.

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 283 based on its 89 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 283.

Estimated Continuous Field Runtime: 4.7 hrs

Approximately 4.7 hours of continuous field operation at ~75% rated power on a full tank (21.7 gal / 82.1 L).

Estimated 75% Load Fuel Burn~4.6 gal/hr (17.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours