massey ferguson 285
 | 1974 - 1982
200 SeriesRow-Crop tractor | 1974 - 1982 | 200 Series | Row-Crop tractor |
|---|---|---|---|---|
1974 - 1982 | ||||
200 Series | ||||
Row-Crop tractor | ||||
1974 - 1982 | |
|---|---|
200 Series | |
Row-Crop tractor |
Production | |
|---|---|
Manufacturer | Massey Ferguson |
Row-Crop tractor | |
Built in Detroit, Michigan, USA | |
Original price was $24,500 in 1982 | |
Variants | |
|---|---|
285 | small chassis |
1085 | large chassis |
Massey Ferguson 285 Engines | |
|---|---|
Perkins 5.2L 4-cyl diesel | |
Perkins 4.1L 4-cyl diesel | |
Engine details ...  |
Massey Ferguson 285 Transmissions | |
|---|---|
8-speed gear | |
12-speed partial power shift | |
Transmission details ...  |
Massey Ferguson 285 Power | |
|---|---|
PTO (claimed) | 81 hp
60.4 kW |
Drawbar (tested) | 69.46 hp
51.8 kW |
PTO (tested) | 81.96 hp
61.1 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | mechanical rear |
Power steering | |
Wet disc brakes | |
Two-post ROPS standard. Cabin and open operator station available. | |
Photos | |
|---|---|
 | |
Massey Ferguson 285 photos...  |
Capacity | |
|---|---|
Fuel | 23 gal
87.1 L |
Hydraulic system | 8.5 gal
32.2 L |
Hydraulics | |
|---|---|
Capacity | 8.5 gal
32.2 L |
Pressure | 2300 psi
158.6 bar |
Valves | 1 to 3 |
Pump flow | 7 gpm*Hitch
26.5 lpm |
| 10 gpm*Remote hydraulics
37.9 lpm |
Steering flow | 5.6 gpm
21.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 4400 lbs
1995 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 (1.375) |
| 1000 (1.375) |
Engine RPM | 540@1730 |
| 1000@2000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 88.75 inches
225 cm |
Weight | 7650 lbs
3470 kg |
Front tire | 7.50-16 |
Rear tire | 16.9-38 |
Full dimensions and tires ...  | |
Massey Ferguson 285 attachments | |
|---|---|
front-end loader | |
Attachment details ...  |
285 Serial Numbers | |
|---|---|
Location: | Below instrument panel |
1974 | 9A202190 |
1975 | 9A207681 |
1976 | 9A232539 |
1977 | 9A254045 |
1978 | 9A276935 |
1979 | 9A296946 |
1980 | 9A326169 |
1981 | 9A339343 |
1982 | 9A344679 |
1983 | 9A350584 |
FAQ: How to read a serial number table. | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
References | |
|---|---|
 | |
Loaders and Spreaders published in 1979, by Massey Ferguson | |
MF 34-81HP Tractors published in 1980, by Massey Ferguson | |
MF 200 Series Tractors published in 1982, by Massey Ferguson | |
MF 285/1085 Tractors published in 1976, by Massey Ferguson | |
285 published in 1976, by Massey Ferguson | |
MF285 Cab Tractor published in 1981, by Massey Ferguson | |
Complete Farm Machinery Guide published in 1976, by Massey Ferguson |
Recommended Products
Advertisement · Featured Tractor-Related Products
John Deere Original Equipment Cool-Gard II PRE-Mix
COOL-GARD II PRE-MIX, 1 GAL;3.78L. DO NOT ADD WATER. Prediluted Engine Coolant. Heavy-duty, low-silicate, high performance antifreeze/coolant. This is a OEM John Deere Part.
Heavy Duty Pistol Grip Grease Gun Kit
🚜 Power Performance: 8000psi Max working pressure guaranteed by iron die cast head and enhanced sealing. 🚜 Ergonomic Design: Pistol grip lets you operate with one hand. Sand blasted grid surface increases friction for safety.
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
2 Pack 3/8" Tractor Bucket Grab Hook
Grade 70 level 3/8 Grab Hook Bolt-On Mount with Backer Plate and for Installation.
* This page contains affiliate links, purchases may generate revenue for this site