Massey Ferguson 2860E

The Massey Ferguson 2860E is a tractor produced by Massey Ferguson. It is equipped with a 148.6 ci 2.4 L engine. The listed engine power is Diesel (listed): 57.3 hp / 42.7 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 3869 lbs 1754 kg.

Engine Power

Diesel (listed): 57.3 hp / 42.7 kW

Fuel & Capacities

14 gal 53.0 L

Transmission

infinite forward and reverse (3-range)

Operating Weight

3869 lbs 1754 kg

Overview

	2020 - 2800E SeriesCompact Utility tractor
2020 -
2800E Series
Compact Utility tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Compact Utility tractor

Massey Ferguson 2860E Engine
Iseki 2.4L 4-cyl diesel
Fuel tank	14 gal 53.0 L
Engine details ...

Massey Ferguson 2860E Power
Engine	57.3 hp 42.7 kW
Gear PTO (claimed)	48 hp 35.8 kW
Hydro PTO (claimed)	45.3 hp 33.8 kW

Mechanical
Four-wheel drive
Power steering
Wet disc brakes
Two-post folding ROPS.

Hydraulics
Type	open center
Pump flow	12.6 gpm 47.7 lpm
Total flow	19.6 gpm 74.2 lpm
Steering flow	7.0 gpm 26.5 lpm

Tractor hitch
Rear Type	II/I
Rear lift (at ends)	2645 lbs 1199 kg
Rear lift (at 24"/610mm)	2425 lbs 1099 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)

Dimensions & Tires
Weight	3869 lbs 1754 kg
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

E Series published in 2020, by Massey Ferguson

Engine

Engine Detail — 148.6 ci / 2.4 L Diesel

Manufacturer	Iseki
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	148.6 ci 2.4 L
Bore/Stroke	3.43x4.03 inches 87 x 102 mm
Emissions	Tier IV
Power	57.3 hp 42.7 kW
Rated RPM	2600
Starter	electric
Starter volts	12

Transmission

Transmission options
8-speed mechanical shuttle
hydrostatic

Transmission — 8 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	8 forward and reverse

Transmission — infinite forward and reverse (3-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (3-range)

Dimensions

Massey Ferguson 2860E Tires

Dimensions
Length	132.8 inches 337 cm
Width	70.1 inches 178 cm
Height	103.8 inches 263 cm
Weight	3869 lbs 1754 kg
Ground clearance	15 inches 38 cm

Photos

Massey Ferguson 2860E compact utility tractor, left side.

Massey Ferguson 2860E compact utility tractor, right side.

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 2860E based on its 57.3 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 2860E.

Estimated Continuous Field Runtime: 4.7 hrs

Approximately 4.7 hours of continuous field operation at ~75% rated power on a full tank (14 gal / 53 L).

Estimated 75% Load Fuel Burn~3 gal/hr (11.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours