Massey Ferguson 415

The Massey Ferguson 415 is a tractor produced by Massey Ferguson. It is equipped with a 152.7 ci 2.5 L engine. The listed engine power is Diesel (listed): 46 hp / 34.3 kW. Transmission: 8 forward and 2 reverse. Drive type: 4x2 2WD. Operating weight: 4475 to 4872 pounds.

Engine Power

Diesel (listed): 46 hp / 34.3 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

15.1 gal 57.2 L

Transmission

8 forward and 2 reverse

Operating Weight

4475 to 4872 pounds

Overview

	2001 - 2010 400 SeriesUtility tractor 400 Series Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor
Built in Canoas, Brazil

Variants
415	utility
415N	narrow

Massey Ferguson 415 Engine
Perkins 2.5L 3-cyl diesel
Fuel tank	15.1 gal 57.2 L
Engine details ...

Massey Ferguson 415 Transmission
8-speed sliding spur gear
Transmission details ...

Massey Ferguson 415 Power
Engine	46 hp 34.3 kW
PTO (claimed)	39.7 hp 29.6 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD (optional)
Steering	hydrostatic power
Wet disc brakes
Open operator station. Two-post ROPS optional with available canopy.

Hydraulics
Pressure	3046 psi 210.0 bar
Pump flow	4.5 gpm 17.0 lpm

Tractor hitch
Rear Type	II
Control	draft, position, and response control

Power Take-off (PTO)
Rear PTO	live
	independent (optional)
Rear PTO Type	540 (1.375)
Engine RPM	540@1900

Dimensions & Tires
Wheelbase	78.7 inches 199 cm
Weight	4475 to 4872 pounds
Front tire	6.00-16
Rear tire	14.9-24 (2WD)
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 152.7 ci / 2.5 L Diesel

Manufacturer	Perkins AD3.152
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	152.7 ci 2.5 L
Bore/Stroke	3.60x5.00 inches 91 x 127 mm
Power	46 hp 34.3 kW
Fuel system	direct injection
Rated RPM	2250
Torque	133.5 lb-ft 181.0 Nm
Torque RPM	1350
Starter	electric
Starter volts	12

Transmission

Transmission — 8 forward and 2 reverse sliding spur gear

Type	sliding spur gear
Gears	8 forward and 2 reverse

Dimensions

Massey Ferguson 415 Tires
Standard tires (ag)	Front: 6.00-16. Rear: 14.9-24 (2WD)
	Front: 12.5/80-18. Rear: 14.9-24 (4WD)

Dimensions
Wheelbase	78.7 inches 199 cm
Length	151.2 inches 384 cm
Height (ROPS)	96.1 inches 244 cm
Height (exhaust)	82.7 inches 210 cm
2WD Shipping weight	4,475 lbs 2029 kg
4WD Shipping weight	4,872 lbs 2209 kg

Photos

Massey Ferguson 415 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 415 based on its 46 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 415.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (15.1 gal / 57.2 L).

Estimated 75% Load Fuel Burn~2.4 gal/hr (9.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours