Massey Ferguson 3075

The Massey Ferguson 3075 is a tractor produced by Massey Ferguson. It is equipped with a 243 ci 4.0 L engine. The listed engine power is Diesel (listed): 95 hp / 70.8 kW. Transmission: Dynashift. Operating weight: 8950 to 9900 pounds.

Engine Power

Diesel (listed): 95 hp / 70.8 kW

Fuel & Capacities

46 gal 174.1 L

Transmission

Dynashift

Operating Weight

8950 to 9900 pounds

Overview

	1993 - 1994 Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor
Original price was $50,200 in 1994

Massey Ferguson 3075 Engine
Perkins 4.0L 4-cyl diesel
Fuel tank	46 gal 174.1 L
Engine details ...

Massey Ferguson 3075 Power
Engine	95 hp 70.8 kW
Drawbar (tested)	81.5 hp 60.8 kW
PTO (tested)	89.7 hp 66.9 kW
Performance test details ...

Mechanical
Two- or four-wheel drive
Cab standard

Hydraulics
Valves	2
Pump flow	15.9 gpm 60.2 lpm

Tractor hitch
Rear Type	II
Rear lift	7300 lbs 3311 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	100.5 inches 255 cm
Weight	8950 to 9900 pounds
Front tire	14.9R24
Rear tire	18.4R34
Full dimensions and tires ...

Engine

Engine Detail — 243 ci / 4.0 L Diesel

Manufacturer	Perkins
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	243 ci 4.0 L
Bore/Stroke	3.937x5.00 inches 100 x 127 mm
Power	95 hp 70.8 kW
Compression	16:1
Rated RPM	2200
Coolant capacity	20.4 qts 19.3 L

Transmission

Transmission options
8-speed
32-speed four-speed power shift

Transmission — 8 forward and 4 reverse

Gears

8 forward and 4 reverse

Transmission — Dynashift

Transmission	Dynashift
Type	four-speed power shift
Gears	32 forward and reverse

Dimensions

Massey Ferguson 3075 Tires
Ag front	14.9R24
Ag rear	18.4R34

Dimensions
Wheelbase	100.5 inches 255 cm
2WD Weight	8950 lbs 4059 kg
4WD Weight	9900 lbs 4490 kg

Tests

OCED Tractor Test 1479
Diesel 32-speed 4WD 7/1993 Link: OCED Tractor Test 1479 file
PTO performance
Max power	89.7 hp 66.9 kW
Fuel use	5.2 gal/hour 19.7 l/hour
Power at rated engine speed	86.1 hp 64.2 kW
Fuel use	5.2 gal/hour 19.7 l/hour
Power at rated PTO speed	88.9 hp 66.3 kW
Fuel use	5.1 gal/hour 19.3 l/hour
Drawbar performance
Max power	81.5 hp 60.8 kW
Fuel use	5.3 gal/hour 20.1 l/hour
Gear 1LA used for power test.
Max pull	9205 lbs 4175 kg
Gear 3TA used for pull test.

Photos

Massey Ferguson 3075 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 3075 based on its 95 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 3075.

Estimated Continuous Field Runtime: 9.3 hrs

Approximately 9.3 hours of continuous field operation at ~75% rated power on a full tank (46 gal / 174.1 L).

Estimated 75% Load Fuel Burn~4.9 gal/hr (18.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours