Massey Ferguson 383

The Massey Ferguson 383 is a tractor produced by Massey Ferguson. It is equipped with a 248 ci 4.1 L engine. The listed engine power is Diesel (listed): 76 hp / 56.7 kW. Transmission: 8 forward and 2 reverse. Operating weight: 6098 lbs 2766 kg.

Engine Power

Diesel (listed): 76 hp / 56.7 kW

Fuel & Capacities

28.5 gal 107.9 L

Transmission

8 forward and 2 reverse

Operating Weight

6098 lbs 2766 kg

Overview

	1987 - 1997 Model year 1987-19881989-1997 300 SeriesUtility tractor 300 Series Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor
Built in Coventry, England
Original price was $18,000 in 1988

Massey Ferguson 383 Engine
Perkins 4.1L 4-cyl diesel
Fuel tank	28.5 gal 107.9 L
Engine details ...

Massey Ferguson 383 Transmission
8-speed gear
Transmission details ...

Massey Ferguson 383 Power
Engine	76 hp 56.7 kW
PTO (claimed)	69 hp 51.5 kW

Mechanical
Two-wheel drive
Power steering
Wet disc brakes
Two-post ROPS. Canopy optional.

Hydraulics
Type	open center
Pressure	3000 psi 206.8 bar
Pump flow	9.5 gpm (aux pump) 36.0 lpm
	4.4 gpm (hitch) 16.7 lpm
Total flow	13.9 gpm 52.6 lpm
	16.8 gpmOptOptional 63.6 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift (at ends)	5410 lbs*Capacity with links horizontal 2453 kg

Power Take-off (PTO)
Rear PTO	live
Rear PTO Type	540 (1.375)

Dimensions & Tires
Wheelbase	84.1 inches 213 cm
Weight	6098 lbs 2766 kg
Front tire	7.50-16
Rear tire	18.4/15-30
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	45
Battery CCA	420 (2x)
	540 (1x)
Battery volts	12

References

300 published in 1986, by Massey Ferguson
300 Series Tractors Data Book published in 1992, by Massey Ferguson
M-F 300 Series Tractor Workshop Manual (1449 244M1) published in 1991

Engine

Engine Detail — 248 ci / 4.1 L Diesel

Manufacturer	Perkins A4.248
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	248 ci 4.1 L
Bore/Stroke	3.975x5.00 inches 101 x 127 mm
Power	76 hp 56.7 kW
Fuel system	direct injection
Air cleaner	dual dry element
Compression	16:1
Rated RPM	2200
Idle RPM	750-2380
Torque	206 lb-ft 279.3 Nm
Torque RPM	1400
Firing order	1-3-4-2
Starter	electric
Starter volts	12
Oil capacity	7.9 qts 7.5 L
Coolant capacity	16 qts 15.1 L

Transmission

Transmission — 8 forward and 2 reverse gear

Type	gear
Gears	8 forward and 2 reverse

Dimensions

Massey Ferguson 383 Tires
Standard tires (ag)	Front: 7.50-16. Rear: 18.4/15-30

Dimensions
Wheelbase	84.1 inches 213 cm
Length	144.4 inches 366 cm
Width	78.8 inches 200 cm
Weight	6098 lbs 2766 kg
Clearance (front axle)	20.9 inches 53 cm
Clearance (drawbar)	14 inches 35 cm

Massey Ferguson 383 Height
Steering wheel	70.1 inches 178 cm
ROPS	99.4 inches 252 cm
Exhaust	97.8 inches 248 cm

Photos

Massey Ferguson 383

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 383 based on its 76 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 383.

Estimated Continuous Field Runtime: 7.2 hrs

Approximately 7.2 hours of continuous field operation at ~75% rated power on a full tank (28.5 gal / 107.9 L).

Estimated 75% Load Fuel Burn~4 gal/hr (15 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours