Massey Ferguson 425 Xtra

The Massey Ferguson 425 Xtra is a tractor produced by Massey Ferguson. It is equipped with a 238 ci 3.9 L engine. The listed engine power is Diesel (listed): 65 hp / 48.5 kW. Transmission: 12 forward and 4 reverse. Drive type: 4x2 2WD. Operating weight: 6,327 lbs 2869 kg.

Engine Power

Diesel (listed): 65 hp / 48.5 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

26.4 gal 99.9 L

Transmission

12 forward and 4 reverse

Operating Weight

6,327 lbs 2869 kg

Overview

	2011 - 400 Xtra SeriesUtility tractor
2011 -
400 Xtra Series
Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor
Built in Canoas, Brazil

Massey Ferguson 425 Xtra Engine
Perkins 3.9L 4-cyl diesel
Engine details ...

Massey Ferguson 425 Xtra Power
Engine	65 hp 48.5 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD (optional)
Steering	hydrostatic power
Hydraulic wet disc brakes
Two-post ROPS.

Capacity
Fuel	26.4 gal 99.9 L
Hydraulic system	11.1 gal 42.0 L

Hydraulics
Capacity	11.1 gal 42.0 L
Pressure	2466 psi 170.0 bar
Valves	1
Pump flow	11.1 gpm 42.0 lpm

Tractor hitch
Rear lift	5,512 lbs 2500 kg

Power Take-off (PTO)
Rear PTO	live
	independent (optional)
Rear PTO Type	540

Dimensions & Tires
Wheelbase	93.3 inches 236 cm
Weight	6,327 lbs 2869 kg
Front tire	7.50-16
Rear tire	18.4-30 (2WD)
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 238 ci / 3.9 L Diesel

Manufacturer	Perkins A4-3.9
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	238 ci 3.9 L
Bore/Stroke	3.875x5.00 inches 98 x 127 mm
Power	65 hp 48.5 kW
Fuel system	direct injection
Rated RPM	2200
Torque	173.3 lb-ft 235.0 Nm
Torque RPM	1400
Starter	electric
Starter volts	12
Oil capacity	7.4 qts 7.0 L

Transmission

Transmission options
8-speed sliding spur gear
12-speed synchromesh

Transmission — 8 forward and 2 reverse sliding spur gear

Type	sliding spur gear
Gears	8 forward and 2 reverse
Oil capacity	44.4 qts 42.0 L

Transmission — 12 forward and 4 reverse synchromesh

Type	synchromesh
Gears	12 forward and 4 reverse
Oil capacity	44.4 qts 42.0 L

Dimensions

Massey Ferguson 425 Xtra Tires
Standard tires (ag)	Front: 7.50-16. Rear: 18.4-30 (2WD)
	Front: 12.4-24. Rear: 18.4-30 (4WD)

Dimensions
Wheelbase	93.3 inches 236 cm
Length	162.6 inches 413 cm
Height (exhaust)	101.6 inches 258 cm
Weight	6,327 lbs 2869 kg

Photos

Massey Ferguson 425 Xtra tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 425 Xtra based on its 65 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 425 Xtra.

Estimated Continuous Field Runtime: 7.8 hrs

Approximately 7.8 hours of continuous field operation at ~75% rated power on a full tank (26.4 gal / 99.9 L).

Estimated 75% Load Fuel Burn~3.4 gal/hr (12.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours