Massey Ferguson 4607M

The Massey Ferguson 4607M is a tractor produced by Massey Ferguson. It is equipped with a 201 ci 3.3 L engine. The listed engine power is Diesel (listed): 70.1 hp / 52.3 kW. Transmission: 18 forward and reverse. Operating weight: 6680 to 7087 pounds.

Engine Power

Diesel (listed): 70.1 hp / 52.3 kW

Fuel & Capacities

30.3 gal 114.7 L

Transmission

18 forward and reverse

Operating Weight

6680 to 7087 pounds

Overview

	2016 - 4600M SeriesUtility tractor
2016 -
4600M Series
Utility tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Utility tractor

Massey Ferguson 4607M Engine
AGCO Power 3.3L 3-cyl diesel
Fuel tank	30.3 gal 114.7 L
Engine details ...

Massey Ferguson 4607M Power
Engine	70.1 hp 52.3 kW
PTO (claimed)	56 hp 41.8 kW

Mechanical
Two- or four-wheel drive
Final drives	internal planetary
Differential lock	mechnical rear
Power steering
Wet disc brakes
Two-post folding ROPS. Cab available with air-conditioning.

Hydraulics
Type	open center
Valves	1 to 3
Pump flow	17.5 gpm 66.2 lpm

Tractor hitch
Rear Type	II
Rear lift	3307 lbs 1500 kg
	4409 lbsOptOptional 1999 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	89 inches 226 cm
Weight	6680 to 7087 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	95
Battery volts	12

Engine

Engine Detail — 201 ci / 3.3 L Diesel

Manufacturer	AGCO Power
Configuration	intercooled turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	201 ci 3.3 L
Bore/Stroke	4.252x4.724 inches 108 x 120 mm
Emissions	Tier IV
Emission control	external cooled echaust gas recirculation with diesel oxidation catalyst
Power	70.1 hp 52.3 kW
Maximum Power	74 hp 55.2 kW
Fuel system	high-pressure common rail
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed partially synchronized
18-speed partially synchronized

Transmission — 12 forward and reverse partially synchronized

Type	partially synchronized
Gears	12 forward and reverse
Clutch	wet disc
Six synchronized gears in two ranges.

Transmission — 18 forward and reverse partially synchronized

Type	partially synchronized
Gears	18 forward and reverse

Dimensions

Massey Ferguson 4607M Tires

Dimensions
Wheelbase	89 inches 226 cm
Length	150.1 inches 381 cm
Width	80.5 inches*Minimum 204 cm
Height (ROPS)	104.3 inches 264 cm
Height (cab)	100.3 inches 254 cm
4WD ROPS Weight	6680 lbs 3030 kg
4WD Cab Weight	7087 lbs 3214 kg
Flange rear axle

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 4607M based on its 70.1 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 4607M.

Estimated Continuous Field Runtime: 8.3 hrs

Approximately 8.3 hours of continuous field operation at ~75% rated power on a full tank (30.3 gal / 114.7 L).

Estimated 75% Load Fuel Burn~3.6 gal/hr (13.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours