Massey Ferguson 4610M

The Massey Ferguson 4610M is a tractor produced by Massey Ferguson. It is equipped with a 201 ci 3.3 L engine. The listed engine power is Diesel (listed): 99 hp / 73.8 kW. Transmission: 18 forward and reverse. Operating weight: 6845 to 7253 pounds.

Engine Power

Diesel (listed): 99 hp / 73.8 kW

Fuel & Capacities

30.3 gal 114.7 L

Transmission

18 forward and reverse

Operating Weight

6845 to 7253 pounds

Overview

	2016 - 4600M SeriesUtility tractor
2016 -
4600M Series
Utility tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Utility tractor

Massey Ferguson 4610M Engine
AGCO Power 3.3L 3-cyl diesel
Fuel tank	30.3 gal 114.7 L
Exhaust fluid (DEF)	4.2 gal 15.9 L
Engine details ...

Massey Ferguson 4610M Power
Engine	99 hp 73.8 kW
PTO (claimed)	80 hp 59.7 kW

Mechanical
Two- or four-wheel drive
Final drives	internal planetary
Differential lock	mechnical rear
Power steering
Wet disc brakes
Two-post folding ROPS. Cab available with air-conditioning.

Hydraulics
Type	open center
Valves	1 to 3
Pump flow	17.5 gpm 66.2 lpm

Tractor hitch
Rear Type	II
Rear lift	3307 lbs 1500 kg
	4409 lbsOptOptional 1999 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	89.9 inches 228 cm
Weight	6845 to 7253 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	95
Battery volts	12

Engine

Engine Detail — 201 ci / 3.3 L Diesel

Manufacturer	AGCO Power
Configuration	intercooled turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	201 ci 3.3 L
Bore/Stroke	4.252x4.724 inches 108 x 120 mm
Emissions	Tier IV
Emission control	diesel exhaust fluid with diesel oxidation catalyst (DOC) (DEF)
Power	99 hp 73.8 kW
Maximum Power	101 hp 75.3 kW
Fuel system	high-pressure common rail
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed partially synchronized
18-speed partially synchronized

Transmission — 12 forward and reverse partially synchronized

Type	partially synchronized
Gears	12 forward and reverse
Clutch	wet disc
Six synchronized gears in two ranges.

Transmission — 18 forward and reverse partially synchronized

Type	partially synchronized
Gears	18 forward and reverse

Dimensions

Massey Ferguson 4610M Tires

Dimensions
Wheelbase	89.9 inches 228 cm
Length	153.5 inches 389 cm
Width	80.7 inches*Minimum width 204 cm
Height (ROPS)	106.6 inches 270 cm
Height (cab)	102.3 inches 259 cm
4WD ROPS Weight	6845 lbs 3104 kg
4WD Cab Weight	7253 lbs 3289 kg
Flange rear axle

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 4610M based on its 99 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 4610M.

Estimated Continuous Field Runtime: 5.9 hrs

Approximately 5.9 hours of continuous field operation at ~75% rated power on a full tank (30.3 gal / 114.7 L).

Estimated 75% Load Fuel Burn~5.1 gal/hr (19.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours