Massey Ferguson 4710M

The Massey Ferguson 4710M is a tractor produced by Massey Ferguson. It is equipped with a 201 ci 3.3 L engine. The listed engine power is Diesel (listed): 100 hp / 74.6 kW. Transmission: Dyna-2. Operating weight: 8267 to 8708 pounds.

Engine Power

Diesel (listed): 100 hp / 74.6 kW

Fuel & Capacities

33 gal 124.9 L

Transmission

Dyna-2

Operating Weight

8267 to 8708 pounds

Overview

	2020 - 4700M SeriesUtility tractor
2020 -
4700M Series
Utility tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Utility tractor

Massey Ferguson 4710M Engine
AGCO Power 3.3L 3-cyl diesel
Fuel tank	33 gal 124.9 L
Exhaust fluid (DEF)	4 gal 15.1 L
Engine details ...

Massey Ferguson 4710M Power
Engine	100 hp 74.6 kW

Mechanical
Two- or four-wheel drive
Wet disc brakes
Cab standard.

Hydraulics
Pressure	2901 psi 200.0 bar
Pump flow	17.2 gpm 65.1 lpm

Tractor hitch
Rear Type	II
Rear lift	6614 lbs 3000 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540 (1.375)
	540/1000 (1.375)OptOptional
Engine RPM	540@1920
	540E@1560
	1000@1964

Dimensions & Tires
Wheelbase	88.6 inches 225 cm
Weight	8267 to 8708 pounds
Full dimensions and tires ...

References

MF 4700 M published in 2020, by Massey Ferguson

Engine

Engine Detail — 201 ci / 3.3 L Diesel

Manufacturer	AGCO Power
Configuration	turbocharged diesel, 3-cylinder 12-valve, liquid-cooled inline
Displacement	201 ci 3.3 L
Bore/Stroke	4.252x4.724 inches 108 x 120 mm
Emissions	Stage 5
Power	100 hp 74.6 kW
Fuel system	common rail electronic injection
Rated RPM	2000
Torque	269 lb-ft 364.8 Nm
Torque RPM	1500
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed mechanical shuttle
12-speed power shuttle
24-speed two-speed power shift

Transmission — 12 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	12 forward and reverse
Six synchronized gears in two ranges with mechanical shuttle.

Transmission — 12 forward and reverse power shuttle

Type	power shuttle
Gears	12 forward and reverse
Six synchronized gears in two ranges with power shuttle.

Transmission — Dyna-2

Transmission	Dyna-2
Type	two-speed power shift
Gears	24 forward and reverse
Six gears in two ranges with two-speed power shift and power shuttle. Optional creeper range provides a total of 48 gear in each direction.

Dimensions

Massey Ferguson 4710M Tires

Dimensions
Wheelbase	88.6 inches 225 cm
Length	160.1 inches 406 cm
Width	71.7 inches 182 cm
Height (cab)	100.4 inches 255 cm
2WD Weight	8267 lbs 3749 kg
4WD Weight	8708 lbs 3949 kg
Ground clearance	18.1 inches 45 cm

Photos

Massey Ferguson 4710M tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 4710M based on its 100 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 4710M.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (33 gal / 124.9 L).

Estimated 75% Load Fuel Burn~5.2 gal/hr (19.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours