Massey Ferguson 5710

The Massey Ferguson 5710 is a tractor produced by Massey Ferguson. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 95 hp / 70.8 kW. Transmission: Dyna-4. Drive type: 4x4 2WD. Operating weight: 8845 to 9661 pounds.

Engine Power

Diesel (listed): 95 hp / 70.8 kW

Drive & Traction

4x4 2WD

Fuel & Capacities

38.3 gal 145.0 L

Transmission

Dyna-4

Operating Weight

8845 to 9661 pounds

Overview

	2017 - 5700 SeriesUtility tractor
2017 -
5700 Series
Utility tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Utility tractor
Original price was $62,784 in 2019

Massey Ferguson 5710 Engine
AGCO Power 4.4L 4-cyl diesel
Fuel tank	38.3 gal 145.0 L
Engine details ...

Massey Ferguson 5710 Power
Engine	95 hp 70.8 kW
PTO (claimed)	83 hp (shuttle) 61.9 kW
	76 hp (Dyna-4) 56.7 kW

Mechanical
Drive	4x4 2WD
	4x4 MFWD 4WD
Final drives	internal planetary
Differential lock	electro-hydraulic rear
Power steering
Wet disc brakes
Two-post folding ROPS. Cab optional.

Hydraulics
Type	open center
Valves	2 or 3
Pump flow	15.1 gpm 57.2 lpm
	25.9 gpm*Optional, with additional 41L auxiliary pump. 98.0 lpm

Tractor hitch
Rear Type	II
Rear lift (at 24"/610mm)	7710 lbs 3497 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
	540/540E OptOptional
	540/540E/1000 OptOptional

Dimensions & Tires
Wheelbase	95.7 inches 243 cm
Weight	8845 to 9661 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	80
Battery volts	12

References

MF 5700 and MF 6700 12x12 Power Shuttle and Dyna-4 Global Series published in 2021, by Massey Ferguson

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	AGCO Power
Configuration	intercooled turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.25x4.72 inches 108 x 120 mm
Emissions	Tier IV
Emission control	selective catalytic reduction (SCR)
Power	95 hp 70.8 kW
Maximum Power	100 hp 74.6 kW
Fuel system	high-pressure common rail direct injection
Rated RPM	2200
Torque	410 lb-ft 556.0 Nm
Torque RPM	1500
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed mechanical shuttle
12-speed power shuttle
16-speed four-speed power shift

Transmission — 12 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	12 forward and reverse
Clutch	dry disc

Transmission — 12 forward and reverse power shuttle

Type	power shuttle
Gears	12 forward and reverse
Clutch	wet disc

Massey Ferguson 5710 Transmission

Transmission — Dyna-4

Transmission	Dyna-4
Type	four-speed power shift
Gears	16 forward and reverse
Clutch	wet disc

Massey Ferguson 5710 Transmission

Dimensions

Massey Ferguson 5710 Tires

Dimensions
Wheelbase	95.7 inches 243 cm
Width	70.7 inches*Minimum 179 cm
Flange rear axle

Massey Ferguson 5710 Weight
2WD ROPS	8845 lbs 4012 kg
2WD Cab	9661 lbs 4382 kg
4WD ROPS 10011 4WD Cab}	9195 lbs 4170 kg

Attachments

Attachment overview
Massey Ferguson 941X loader
Massey Ferguson 946X loader
Massey Ferguson FL3723 loader
Massey Ferguson FL3819 loader

Photos

Massey Ferguson 5710 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 5710 based on its 95 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 5710.

Estimated Continuous Field Runtime: 7.8 hrs

Approximately 7.8 hours of continuous field operation at ~75% rated power on a full tank (38.3 gal / 145 L).

Estimated 75% Load Fuel Burn~4.9 gal/hr (18.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours