Massey Ferguson 575

The Massey Ferguson 575 is a tractor produced by Massey Ferguson. It is equipped with a 235.6 ci 3.9 L engine. The listed engine power is Diesel (listed): 66 hp / 49.2 kW. Transmission: Multi-Power. Operating weight: 8036 lbs 3645 kg.

Engine Power

Diesel (listed): 66 hp / 49.2 kW

Fuel & Capacities

25.9 gal 98.0 L

Transmission

Multi-Power

Operating Weight

8036 lbs 3645 kg

Overview

	1976 - 1982 500 SeriesRow-Crop tractor 500 Series Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor
Factories	Coventry, England
	Le Plessis-Robinson, France

Massey Ferguson 575 Engine
Perkins 3.9L 4-cyl diesel
Fuel tank	25.9 gal 98.0 L
Engine details ...

Massey Ferguson 575 Power
Engine	66 hp 49.2 kW
PTO (claimed)	60.3 hp 45.0 kW

Mechanical
Two- or four-wheel drive
Power steering
Wet disc brakes
Cab standard with heater. ROPS available.

Hydraulics
Valves	2 or 3
Pump flow	7.2 gpm 27.3 lpm
	16.5 gpmOptOptional 62.5 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift (at ends)	3960 lbs 1796 kg

Power Take-off (PTO)
Rear PTO	live
	independent OptOptional
Clutch	mechanical dry disc (live)
	hydraulic (independent)
Rear PTO Type	540 (1.375)
	1000 (1.375)
Engine RPM	540@1684
	1000@1690

Dimensions & Tires
Wheelbase	88.5 inches 224 cm
Weight	8036 lbs 3645 kg
Front tire	7.50-18
Rear tire	13.6-38
Full dimensions and tires ...

References

New Tractor Line 500-Series published by Massey Ferguson
MF575 Tractor published in 1978, by Massey Ferguson
575 4WD published in 1981, by Massey Ferguson

Engine

Engine Detail — 235.6 ci / 3.9 L Diesel

Manufacturer	Perkins A4.236
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	235.6 ci 3.9 L
Bore/Stroke	3.875x5.00 inches 98 x 127 mm
Power	66 hp 49.2 kW
Compression	16:1
Rated RPM	2000
Torque	188.1 lb-ft 255.1 Nm
Torque RPM	1250
Starter type	electric
Oil capacity	7.5 qts 7.1 L
Coolant capacity	15 qts 14.2 L

Transmission

Transmission options
8-speed gear
12-speed two-speed power shift

Transmission — 8 forward and 2 reverse gear

Type	gear
Gears	8 forward and 2 reverse
Clutch	305mm dry disc
Four gears, plus reverse, in high and low ranges.
With 16.9x30 rear tires.

Transmission — Multi-Power

Transmission	Multi-Power
Type	two-speed power shift
Gears	12 forward and 4 reverse
Three gears in low and high ranges with two-speed Multi-Power power shift.
With 16.9x30 rear tires.

Dimensions

Massey Ferguson 575 Tires
2WD Ag front	7.50-18
4WD Ag front	11.2-24
Ag rear	13.6-38
4WD Ag rear	16.9-34

Dimensions
Wheelbase	88.5 inches 224 cm
Length	145 inches 368 cm
Width	81.5 inches 207 cm
Height (cab)	101.5 inches 257 cm
2WD Weight	8036 lbs 3645 kg
Ground clearance	18.5 inches 46 cm

Photos

Massey Ferguson 575

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 575 based on its 66 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 575.

Estimated Continuous Field Runtime: 7.5 hrs

Approximately 7.5 hours of continuous field operation at ~75% rated power on a full tank (25.9 gal / 98 L).

Estimated 75% Load Fuel Burn~3.4 gal/hr (13 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours