Massey Ferguson 675

The Massey Ferguson 675 is a tractor produced by Massey Ferguson. It is equipped with a 235.6 ci 3.9 L engine. The listed engine power is Diesel (gross): 70 hp / 52.2 kW. Transmission: 12 forward and 4 reverse. Operating weight: 6700 to 8000 pounds.

Engine Power

Diesel (gross): 70 hp / 52.2 kW

Fuel & Capacities

20 gal 75.7 L

Transmission

12 forward and 4 reverse

Operating Weight

6700 to 8000 pounds

Overview

	1983 - 1986 Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor

Massey Ferguson 675 Engine
Perkins 3.9L 4-cyl diesel
Fuel tank	20 gal 75.7 L
Engine details ...

Massey Ferguson 675 Transmission
12-speed synchromesh
Transmission details ...

Massey Ferguson 675 Power
Engine (gross)	70 hp 52.2 kW
PTO (claimed)	60 hp 44.7 kW

Mechanical
Two- or four-wheel drive
Power steering
Wet disc brakes
Cab standard with available air-conditioning.

Hydraulics
Pump flow	16.4 gpm 62.1 lpm

Tractor hitch
Rear Type	II
Rear lift (at ends)	3962 lbs 1797 kg

Power Take-off (PTO)
Rear PTO Type	540 (1.375)
Engine RPM	540@1688

Dimensions & Tires
Wheelbase	90.2 inches 229 cm
Weight	6700 to 8000 pounds
Full dimensions and tires ...

Engine

Engine Detail — 235.6 ci / 3.9 L Diesel

Manufacturer	Perkins A4.236
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	235.6 ci 3.9 L
Bore/Stroke	3.87x5.00 inches 98 x 127 mm
Power (gross)	70 hp 52.2 kW
Compression	16.1:1
Rated RPM	2000
Torque	188 lb-ft 254.9 Nm
Torque RPM	1250
Starter type	electric

Transmission

Transmission — 12 forward and 4 reverse synchromesh

Type	synchromesh
Gears	12 forward and 4 reverse

Dimensions

Massey Ferguson 675 Tires

Dimensions
Wheelbase	90.2 inches 229 cm
Length	148.8 inches 377 cm
Width	81.5 inches 207 cm
2WD Weight	6700 lbs 3039 kg
4WD Weight	8000 lbs 3628 kg

Photos

Massey Ferguson 675

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 675 based on its 70 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 675.

Estimated Continuous Field Runtime: 5.5 hrs

Approximately 5.5 hours of continuous field operation at ~75% rated power on a full tank (20 gal / 75.7 L).

Estimated 75% Load Fuel Burn~3.6 gal/hr (13.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours