Massey Ferguson 7619

The Massey Ferguson 7619 is a tractor produced by Massey Ferguson. It is equipped with a 402.5 ci 6.6 L engine. The listed engine power is Diesel (net): 170 hp / 126.8 kW. Transmission: Dyna-VT. Operating weight: 15800 lbs 7166 kg.

Engine Power

Diesel (net): 170 hp / 126.8 kW

Fuel & Capacities

114 gal 431.5 L

Transmission

Dyna-VT

Operating Weight

15800 lbs 7166 kg

Overview

	2013 - 2014 7600 SeriesRow-Crop tractor 7600 Series Row-Crop tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Row-Crop tractor
Built in Beauvais, France

Massey Ferguson 7619 Engine
Sisu 6.6L 6-cyl diesel
Engine details ...

Massey Ferguson 7619 Transmission
24-speed six-speed power shift
Transmission details ...

Massey Ferguson 7619 Power
Engine (net)	170 hp 126.8 kW
PTO (claimed)	140 hp 104.4 kW
Drawbar (tested)	123.8 hp 92.3 kW
PTO (tested)	173.3 hp 129.2 kW
Performance test details ...

Mechanical
Four-wheel drive
Final drives	inboard planetary
Differential lock	electro-hydraulic standard
Power steering
Hydraulic wet disc brakes
Trailer brakes	hydraulic (optional)
	pneumatic (optional)
Cab standard. Optional hydraulic OptiRide cab suspension. AGCOCOMMAND (optional); Auto-Guide 3000 (optional)

Capacity
Fuel	114 gal 431.5 L
Exhaust fluid (DEF)	14 gal 53.0 L
Hydraulic system	26.4 gal 99.9 L

Hydraulics
Type	closed-center load sensing (CCLS)
Capacity	26.4 gal 99.9 L
Pressure	2900 psi 200.0 bar
Valves	3 (mechanical)
	4 (2 mech, 2 elec)
	4 (electric)
SCV flow	24.3 gpm 92.0 lpm
Total flow	29 gpm 109.8 lpm
	39 gpmOptOptional 147.6 lpm

Tractor hitch
Control	electronic lower link draft sensing
Rear lift (at ends)	14000 lbs (Dyna-6) 6350 kg
	13715 lbs (Dyna-VT) 6221 kg
Front Hitch	optional
Drawbar	Cat. II with drop pin

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/1000 (1.375)
	540/540E/1000 (1.375)
	540/1000/1000E (1.375)
	540/540E/1000/1000E (1.375)
Engine RPM	540@1890 (Dyna-6)
	540@2065 (Dyna-VT)
	540E@1524 (Dyna-6)
	540E@1590 (Dyna-VT)
	1000@2000 (Dyna-6)
	1000@2034 (Dyna-VT)
	1000E@1595

Dimensions & Tires
Wheelbase	117.8 inches 299 cm
Weight	15800 lbs 7166 kg
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	120
	175 (option)
	240 (dual 120 option)
Batteries	2
Battery volts	12

References

7600 Series published in 2013, by Massey Ferguson

Engine

Engine Detail — 402.5 ci / 6.6 L Diesel

Manufacturer	Sisu
Configuration	turbocharged air-to-air aftercooled diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	402.5 ci 6.6 L
Bore/Stroke	4.252x4.724 inches 108 x 120 mm
Emissions	Interim Tier IV
Emission control	selective catalytic reduction (SCR)
Power (net)	170 hp 126.8 kW
Fuel system	electronic high-pressure common rail
Pre-heating	thermostart
Compression	17.4:1
Rated RPM	2100
Starter	electric
Starter volts	12

Transmission

Transmission — Dyna-6

Transmission	Dyna-6
Type	six-speed power shift
Gears	24 forward and reverse
Six power shift gears in four ranges.

Transmission — Dyna-VT

Transmission	Dyna-VT
Gears	infinite forward and reverse (2-range)
continuously-variable transmission (CVT)

Dimensions

Massey Ferguson 7619 Tires

Dimensions
Wheelbase	117.8 inches 299 cm
Length	203.6 inches 517 cm
Height (cab)	120.7 inches 306 cm
	124 inches (AutoGuide) 314 cm
Front axle	4WD
Front axle	QuadLink Suspended 4WD
Bar rear axle	84.41 inch length 2144 mm (Dyna-6)
Bar rear axle	89.65 inch length 2277 mm (Dyna-VT)
Long bar rear axle	112.1 inch length 2847 mm (Dyna-6)
Long bar rear axle	113 inch length 2870 mm (Dyna-VT)

Massey Ferguson 7619 Weight
Shipping	15800 lbs 7166 kg
Max capacity	26445 lbs (Dyna-6) 11995 kg
	27558 lbs (Dyna-VT) 12500 kg
Max Drawbar	3527 lbs 1599 kg

Tests

Tractor Tests
OECD 2703: diesel Dyna-VT 4WD
OECD 2758: diesel Dyna-6 4WD

OCED Tractor Test 2703
Diesel Dyna-VT 4WD January 2012 - March 2012, Link: OCED Tractor Test 2703 file
PTO performance
Max power	173.3 hp 129.2 kW
Fuel use	9.4 gal/hour 35.6 l/hour
Power at rated engine speed	151.5 hp 113.0 kW
Fuel use	8.8 gal/hour 33.3 l/hour
Power at rated PTO speed	161.6 hp 120.5 kW
Fuel use	9.1 gal/hour 34.4 l/hour
Drawbar performance
Max power	115.2 hp 85.9 kW
Fuel use	8.1 gal/hour 30.7 l/hour
Max pull	16860 lbs 7647 kg

OCED Tractor Test 2758
Diesel Dyna-6 4WD September 2012 - October 2012, Link: OCED Tractor Test 2758 file
PTO performance
Max power	169.9 hp 126.7 kW
Fuel use	9.4 gal/hour 35.6 l/hour
Power at rated engine speed	145.5 hp 108.5 kW
Fuel use	8.7 gal/hour 32.9 l/hour
Power at rated PTO speed	162.0 hp 120.8 kW
Fuel use	9.2 gal/hour 34.8 l/hour
Drawbar performance
Max power	123.8 hp 92.3 kW
Fuel use	8.1 gal/hour 30.7 l/hour
Gear 3A used for power test.
Max pull	14835 lbs 6729 kg
Gear 1F used for pull test.

Photos

Massey Ferguson 7619

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 7619 based on its 170 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 7619.

Estimated Continuous Field Runtime: 12.9 hrs

Approximately 12.9 hours of continuous field operation at ~75% rated power on a full tank (114 gal / 431.5 L).

Estimated 75% Load Fuel Burn~8.8 gal/hr (33.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours