Massey Ferguson 7622
The Massey Ferguson 7622 is a tractor produced by Massey Ferguson. It is equipped with a 449.4 ci 7.4 L engine. The listed engine power is Diesel (net): 200 hp / 149.1 kW; Diesel (net): 200 hp / 149.1 kW. Transmission: Dyna-VT. Operating weight: 15990 to 18495 pounds.
Engine Power
Diesel (net): 200 hp / 149.1 kW; Diesel (net): 200 hp / 149.1 kW
Fuel & Capacities
114 gal
431.5 L
Transmission
Dyna-VT
Operating Weight
15990 to 18495 pounds
Overview
![]() | 2013 - 2014
7600 SeriesRow-Crop tractor
7600 Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Massey Ferguson (a part of AGCO) |
Row-Crop tractor | |
Built in Beauvais, France | |
Massey Ferguson 7622 Engine | |
|---|---|
Sisu 7.4L 6-cyl diesel | |
Engine details ... |
Massey Ferguson 7622 Transmission | |
|---|---|
24-speed six-speed power shift | |
Transmission details ... |
Massey Ferguson 7622 Power | |
|---|---|
Engine (net) | 200 hp
149.1 kW |
PTO (claimed) | 165 hp
123.0 kW |
Drawbar (tested) | 168.77 hp
125.9 kW |
PTO (tested) | 202.4 hp
150.9 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | inboard planetary |
Differential lock | electro-hydraulic standard |
Power steering | |
Hydraulic wet disc brakes | |
Trailer brakes | hydraulic (optional) |
pneumatic (optional) | |
Cab standard. Optional hydraulic OptiRide cab suspension. AGCOCOMMAND (optional); Auto-Guide 3000 (optional) | |
Capacity | |
|---|---|
Fuel | 114 gal
431.5 L |
Exhaust fluid (DEF) | 14 gal
53.0 L |
Hydraulic system | 26.4 gal
99.9 L |
Hydraulics | |
|---|---|
Type | closed-center load sensing (CCLS) |
Capacity | 26.4 gal
99.9 L |
Pressure | 2900 psi
200.0 bar |
Valves | 3 (mechanical) |
4 (2 mech, 2 elec) | |
4 (electric) | |
SCV flow | 24.3 gpm
92.0 lpm |
Total flow | 29 gpm
109.8 lpm |
39 gpmOptOptional
147.6 lpm | |
Tractor hitch | |
|---|---|
Control | electronic lower link draft sensing |
Rear lift (at ends) | 14000 lbs (Dyna-6)
6350 kg |
13715 lbs (Dyna-VT)
6221 kg | |
Front Hitch | optional |
Drawbar | Cat. II with drop pin |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic |
Rear PTO Type | 540/1000 (1.375) |
540/540E/1000 (1.375) | |
540/1000/1000E (1.375) | |
540/540E/1000/1000E (1.375) | |
Engine RPM | 540@1890 (Dyna-6) |
540@2065 (Dyna-VT) | |
540E@1524 (Dyna-6) | |
540E@1590 (Dyna-VT) | |
1000@2000 (Dyna-6) | |
1000@2034 (Dyna-VT) | |
1000E@1595 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 117.8 inches
299 cm |
Weight | 15990 to 18495 pounds |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 120 |
175 (option) | |
240 (dual 120 option) | |
Batteries | 2 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
7600 Series published in 2013, by Massey Ferguson |
Engine
Engine Detail — 449.4 ci / 7.4 L Diesel
Manufacturer | Sisu |
Configuration | turbocharged air-to-air aftercooled diesel, 6-cylinder 24-valve, liquid-cooled |
The 6.6L engine is used when the 7622 is equipped with the Dyna-VT transmission. | |
Displacement | 449.4 ci
7.4 L |
Bore/Stroke | 4.252x5.276 inches
108 x 134 mm |
Emissions | Interim Tier IV |
Emission control | selective catalytic reduction (SCR) |
Power (net) | 200 hp
149.1 kW |
Fuel system | electronic high-pressure common rail |
Pre-heating | thermostart |
Compression | 17.4:1 |
Rated RPM | 2100 |
Starter | electric |
Starter volts | 12 |
Engine Detail — 449.4 ci / 7.4 L Diesel
Manufacturer | Sisu |
Configuration | turbocharged air-to-air aftercooled diesel, 6-cylinder 24-valve, liquid-cooled |
The 7.4L engine is used when the 7622 is equipped with the Dyna-6 transmission. | |
Displacement | 449.4 ci
7.4 L |
Bore/Stroke | 4.252x5.276 inches
108 x 134 mm |
Emissions | Interim Tier IV |
Emission control | selective catalytic reduction (SCR) |
Power (net) | 200 hp
149.1 kW |
Fuel system | electronic high-pressure common rail |
Pre-heating | thermostart |
Compression | 17.8:1 |
Rated RPM | 2100 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — Dyna-6
Transmission | Dyna-6 |
Type | six-speed power shift |
Gears | 24 forward and reverse |
Six power shift gears in four ranges. | |
Transmission — Dyna-VT
Transmission | Dyna-VT |
Gears | infinite forward and reverse (2-range) |
continuously-variable transmission (CVT) | |
Dimensions
Massey Ferguson 7622 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 117.8 inches
299 cm |
Length | 203.6 inches
517 cm |
Height (cab) | 120.7 inches
306 cm |
124 inches (AutoGuide)
314 cm | |
Front axle | 4WD |
Front axle | QuadLink Suspended 4WD |
Bar rear axle | 84.17 inch length
2137 mm (Dyna-6) |
Bar rear axle | 89.65 inch length
2277 mm (Dyna-VT) |
Long bar rear axle | 112 inch length
2844 mm (Dyna-6) |
Long bar rear axle | 113 inch length
2870 mm (Dyna-VT) |
Massey Ferguson 7622 Weight | |
|---|---|
Shipping | 15990 lbs
7253 kg |
Operating | 18495 lbs (Dyna-VT with 650/65R38 singles)
8389 kg |
Max capacity | 26445 lbs (Dyna-6)
11995 kg |
27558 lbs (Dyna-VT)
12500 kg | |
Max Drawbar | 3527 lbs
1599 kg |
Tests
Tractor Tests | |
|---|---|
OECD 2705: 6.6 diesel Dyna-VT 4WD | |
OECD 2104: 7.4 diesel Dyna-6 4WD |
OCED Tractor Test 2705 | |
|---|---|
6.6 diesel Dyna-VT 4WD
January 2012 - March 2012,
Link: OCED Tractor Test 2705 file | |
PTO performance | |
Max power | 202.4 hp
150.9 kW |
Fuel use | 10.8 gal/hour
40.9 l/hour |
Power at rated engine speed | 176.7 hp
131.8 kW |
Fuel use | 10.2 gal/hour
38.6 l/hour |
Power at rated PTO speed | 187.5 hp
139.8 kW |
Fuel use | 10.5 gal/hour
39.7 l/hour |
Drawbar performance | |
Max power | 135.2 hp
100.8 kW |
Fuel use | 9.6 gal/hour
36.3 l/hour |
Pull at 8.6KPH | |
Max pull | 17040 lbs
7729 kg |
Pull at 4KPH | |
OCED Tractor Test 2104 | |
|---|---|
7.4 diesel Dyna-6 4WD
November 18 - December 3, 2014
Link: OCED Tractor Test 2104 file | |
PTO performance | |
Max power | 202.14 hp
150.7 kW |
Fuel use | 11.3 gal/hour
42.8 l/hour |
Power at rated engine speed | 185.13 hp
138.1 kW |
Fuel use | 11.2 gal/hour
42.4 l/hour |
Power at rated PTO speed | 196.82 hp
146.8 kW |
Fuel use | 11.2 gal/hour
42.4 l/hour |
Drawbar performance | |
Max power | 168.77 hp
125.9 kW |
Fuel use | 11.1 gal/hour
42.0 l/hour |
Gear 3A used for power test. | |
Max pull | 16822 lbs
7630 kg |
Gear 2B used for pull test. | |
Photos
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 7622.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Massey Ferguson 7622 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Massey Ferguson 7622.
Converted Equivalents:
Horsepower (HP)0 hp
Kilowatts (kW)0 kW
Metric Horsepower (PS / CV)0 PS
Direct Competitor Comparison
Compare Massey Ferguson 7622 against same-era industry alternatives in the same horsepower class.
Current Model
Massey Ferguson
Massey Ferguson 7622
Engine Power:Diesel (net): 200 hp / 149.1 kW; Diesel (net): 200 hp / 149.1 kW
★ Baseline Reference
Related models
Massey Ferguson 8140
- Power:
- 161.1
- Production years:
- 1995 - 1998
Massey Ferguson 8240
- Power:
- 161.1
- Production years:
- 1999 - 2003
Massey Ferguson 6S.165
- Power:
- 162.3
- Production years:
- 2022 - 2026
Massey Ferguson 7S.165
- Power:
- 162.3
- Production years:
- 2021 - 2026
Massey Ferguson 680
- Power:
- 165
- Production years:
- 2003 - 2009


