Massey Ferguson 95X

The Massey Ferguson 95X is a tractor produced by Massey Ferguson. It is equipped with a 356.5 ci 5.8 L engine. The listed engine power is Diesel (listed): 100 hp / 74.6 kW. Transmission: 8 forward and 2 reverse. Operating weight: 8576 lbs 3890 kg.

Engine Power

Diesel (listed): 100 hp / 74.6 kW

Fuel & Capacities

31.7 gal 120.0 L

Transmission

8 forward and 2 reverse

Operating Weight

8576 lbs 3890 kg

Overview

	1973 - 1978 Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor
Built in São Paulo, Brazil

Massey Ferguson 95X Engine
Perkins 5.8L 6-cyl diesel
Fuel tank	31.7 gal 120.0 L
Engine details ...

Massey Ferguson 95X Transmission
8-speed
Transmission details ...

Massey Ferguson 95X Power
Engine	100 hp 74.6 kW
PTO (claimed)	72 hp 53.7 kW

Mechanical
Two-wheel drive
Power steering
Mechanical disc brakes
Open operator station.

Tractor hitch
Rear Type	II
Control	position and draft control

Power Take-off (PTO)
Clutch	310mm disc
Rear PTO Type	540

Dimensions & Tires
Weight	8576 lbs 3890 kg
Front tire	7.50x18
Rear tire	18.4/15x34
Full dimensions and tires ...

Engine

Engine Detail — 356.5 ci / 5.8 L Diesel

Manufacturer	Perkins A6.357.2
Fuel Type	Diesel
Configuration	6-cylinder, liquid-cooled
Displacement	356.5 ci 5.8 L
Bore/Stroke	4.50x4.10 inches 114 x 104 mm
Power	100 hp 74.6 kW
Air cleaner	oil bath
Rated RPM	2200
Torque	245.9 lb-ft 333.4 Nm
Torque RPM	1400
Starter	electric
Starter volts	12
Oil capacity	13.75 qts 13.0 L
Coolant capacity	22.5 qts 21.3 L

Transmission

Transmission — 8 forward and 2 reverse

Gears	8 forward and 2 reverse
Oil capacity	31.7 qts 30.0 L

Dimensions

Massey Ferguson 95X Tires
Ag front	7.50x18
Ag rear	18.4/15x34
	23.1/18x26

Dimensions
Length	148.4 inches 376 cm
Width	82.3 inches 209 cm
Height (steering wheel)	68.9 inches 175 cm
Shipping weight	8576 lbs 3890 kg
Ballasted weight	12566 lbs 5699 kg
Front tread	53.9 to 77.6 inches 136 to 197 cm
Rear tread	63.8 to 79.9 inches 162 to 202 cm
Rear tread	72.1 inches 183 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 95X based on its 100 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 95X.

Estimated Continuous Field Runtime: 6.1 hrs

Approximately 6.1 hours of continuous field operation at ~75% rated power on a full tank (31.7 gal / 120 L).

Estimated 75% Load Fuel Burn~5.2 gal/hr (19.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours