McCormick Intl C105 Max

The McCormick Intl C105 Max is a tractor produced by Mccormick Intl. It is equipped with a 268 ci 4.4 L engine. The listed engine power is Diesel (listed): 98.6 hp / 73.5 kW. Transmission: overdrive syncro shuttle. Operating weight: 6,813 lbs (2WD) 3090 kg.

Engine Power

Diesel (listed): 98.6 hp / 73.5 kW

Fuel & Capacities

27 gal 102.2 L

Transmission

overdrive syncro shuttle

Operating Weight

6,813 lbs (2WD) 3090 kg

Overview

	2004 - 2009 Model year 2004-20072007-2009 C-Max SeriesUtility tractor C-Max Series Utility tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Utility tractor
Built in Doncaster, England

Variants
C105 Max	utility
C105HC	high-crop

McCormick Intl C105 Max Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	27 gal 102.2 L
Engine details ...

McCormick Intl C105 Max Power
Engine	98.6 hp 73.5 kW
PTO (claimed)	88 hp 65.6 kW

Mechanical
Two- or four-wheel drive
Power steering
Wet disc brakes
Two-post ROPS. Cab optional.

Hydraulics
Type	open center
Pressure	2611 psi 180.0 bar
Valves	2 to 4
Pump flow	13.8 gpm 52.2 lpm
Total flow	21.7 gpm 82.1 lpm
Steering flow	7.9 gpm 29.9 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift (at ends)	5732 lbs 2600 kg
	8157 lbsOptOptional 3700 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/750
	540/1000

Dimensions & Tires
2WD Wheelbase	93.1 inches 236 cm
4WD Wheelbase	92.1 inches 233 cm
Weight	6813 to 7343 pounds
Front tire	9.00-16
Rear tire	18.4/30
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

References

C Max Series published in 2006, by McCormick

Engine

Engine Detail — 268 ci / 4.4 L Diesel

Manufacturer	Perkins 1104C-44T
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	268 ci 4.4 L
Bore/Stroke	4.134x5.00 inches 105 x 127 mm
Emissions	Tier II
Power	98.6 hp 73.5 kW
Rated RPM	2200
Torque	268.5 lb-ft 364.1 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed
24-speed

Transmission — Reverse Power Shuttle (RPS)

Transmission	Reverse Power Shuttle (RPS)
Gears	12 forward and reverse
Clutch	304.8mm cerametallic dry disc

Transmission — synchro shuttle

Transmission

synchro shuttle

Transmission — overdrive syncro shuttle

Transmission	overdrive syncro shuttle
Gears	24 forward and 12 reverse

Dimensions

McCormick Intl C105 Max Tires
Ag front	9.00-16 (2WD)
	12.4-24 (4WD)
Ag rear	18.4/30

Dimensions
2WD Wheelbase	93.1 inches 236 cm
4WD Wheelbase	92.1 inches 233 cm
Length	163.8 inches 416 cm
Width	69.3 inches*Minimum width 176 cm
Weight	6,813 lbs (2WD) 3090 kg
	7,343 lbs (4WD) 3330 kg
Front tread	57.3 to 76.3 inches 145 to 193 cm
Rear tread	50.9 to 79.2 inches 129 to 201 cm

McCormick Intl C105 Max Height
Steering wheel	70.5 inches 179 cm
Hood	66.1 inches 167 cm
ROPS	100.8 inches 256 cm

Photos

McCormick Intl C105 Max tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl C105 Max based on its 98.6 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl C105 Max.

Estimated Continuous Field Runtime: 5.3 hrs

Approximately 5.3 hours of continuous field operation at ~75% rated power on a full tank (27 gal / 102.2 L).

Estimated 75% Load Fuel Burn~5.1 gal/hr (19.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours