McCormick Intl C50

The McCormick Intl C50 is a tractor produced by Mccormick Intl. It is equipped with a 164.75 ci 2.7 L engine. The listed engine power is Diesel (listed): 53 hp / 39.5 kW. Transmission: synchromesh. Operating weight: 5336 to 6063 pounds.

Engine Power

Diesel (listed): 53 hp / 39.5 kW

Fuel & Capacities

31.7 gal 120.0 L

Transmission

synchromesh

Operating Weight

5336 to 6063 pounds

Overview

	2001 - 2003 C SeriesUtility tractor C Series Utility tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Utility tractor
Built in Doncaster, England

McCormick Intl C50 Engine
Perkins 2.7L 3-cyl diesel
Fuel tank	31.7 gal 120.0 L
Engine details ...

McCormick Intl C50 Power
Engine	53 hp 39.5 kW
PTO (claimed)	40 hp 29.8 kW

Mechanical
Two- or four-wheel drive

Hydraulics
Type	open center
Pump flow	16.0 gpm 60.6 lpm

Tractor hitch
Rear lift	3664 lbs 1661 kg

Power Take-off (PTO)
Rear PTO Type	540

Dimensions & Tires
Weight	5336 to 6063 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 164.75 ci / 2.7 L Diesel

Manufacturer	Perkins
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	164.75 ci 2.7 L
Bore/Stroke	3.74x5.00 inches 95 x 127 mm
Power	53 hp 39.5 kW
Rated RPM	2250
Torque	140.1 lb-ft 190.0 Nm
Torque RPM	1200
Starter volts	12

Transmission

Transmission options
8-speed
16-speed

Transmission — synchromesh

Transmission	synchromesh
Gears	8 forward and 4 reverse
Clutch	dry disc

Transmission — 16 forward and 8 reverse

Gears

16 forward and 8 reverse

Dimensions

McCormick Intl C50 Tires

Dimensions
2WD Shipping weight	5336 lbs 2420 kg
4WD Shipping weight	6063 lbs 2750 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl C50 based on its 53 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl C50.

Estimated Continuous Field Runtime: 11.5 hrs

Approximately 11.5 hours of continuous field operation at ~75% rated power on a full tank (31.7 gal / 120 L).

Estimated 75% Load Fuel Burn~2.8 gal/hr (10.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours