McCormick Intl CTJ23

The McCormick Intl CTJ23 is a tractor produced by Mccormick Intl. It is equipped with a 68.7 ci 1.1 L engine. The listed engine power is Diesel (listed): 23 hp / 17.2 kW. Transmission: infinite forward and reverse (2-range). Operating weight: 410 lbs 185 kg.

Engine Power

Diesel (listed): 23 hp / 17.2 kW

Fuel & Capacities

6.6 gal 25.0 L

Transmission

infinite forward and reverse (2-range)

Operating Weight

410 lbs 185 kg

Overview

	2009 - 2014 CTJ SeriesCompact Utility tractor CTJ Series Compact Utility tractor

Production
Manufacturer	McCormick Intl
Compact Utility tractor

McCormick Intl CTJ23 Engine
Mitsubishi 1.1L 3-cyl diesel
Fuel tank	6.6 gal 25.0 L
Engine details ...

McCormick Intl CTJ23 Transmission
hydrostatic
Transmission details ...

McCormick Intl CTJ23 Power
Engine	23 hp 17.2 kW
PTO (claimed)	18.5 hp 13.8 kW

Mechanical
Four-wheel drive
Differential lock	mechanical rear
Power steering
Wet disc brakes
Two-post folding ROPS.

Hydraulics
Type	open center
Valves	1
Pump flow	4.5 gpm 17.0 lpm
Total flow	7.1 gpm 26.9 lpm
Steering flow	2.6 gpm 9.8 lpm

Tractor hitch
Rear Type	I
Control	position control
Rear lift (at ends)	1433 lbs 650 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)
Mid PTO	independent
Mid PTO Type	2000

Dimensions & Tires
Wheelbase	60 inches 152 cm
Weight	1609 lbs 729 kg
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	50
Battery volts	12

References

CTJ Series published in 2009, by McCormick

Engine

Engine Detail — 68.7 ci / 1.1 L Diesel

Manufacturer	Mitsubishi S3L
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	68.7 ci 1.1 L
Bore/Stroke	3.07x3.609 inches 78 x 92 mm
Emissions	Tier III
Power	23 hp 17.2 kW
Air cleaner	dry
Pre-heating	glow plug
Rated RPM	2700
Starter	electric
Starter volts	12

Transmission

Transmission — infinite forward and reverse (2-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (2-range)

Dimensions

McCormick Intl CTJ23 Tires
Industrial front	23x8.50-12
Industrial rear	12x16.5

Dimensions
Wheelbase	60 inches 152 cm
Length	103 inches 261 cm
Width	46 inches 116 cm
Height (ROPS)	85 inches 215 cm
Height (Folded ROPS)	69 inches 175 cm
Weight	1609 lbs 729 kg
Ground clearance	10 inches 25 cm

Attachments

Attachment overview
60" mid-mount mower deck
Front-end loader

60" Mower deck
Type	mid-mount McCormick MS60
Cutting width	60 inches 152 cm
Weight	410 lbs 185 kg

Photos

McCormick Intl CTJ23 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl CTJ23 based on its 23 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl CTJ23.

Estimated Continuous Field Runtime: 5.5 hrs

Approximately 5.5 hours of continuous field operation at ~75% rated power on a full tank (6.6 gal / 25 L).

Estimated 75% Load Fuel Burn~1.2 gal/hr (4.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours