McCormick Intl MC105

The McCormick Intl MC105 is a tractor produced by Mccormick Intl. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 102 hp / 76.1 kW. Transmission: AutoSpeed. Operating weight: 9610 to 11905 pounds.

Engine Power

Diesel (listed): 102 hp / 76.1 kW

Fuel & Capacities

52 gal 196.8 L

Transmission

AutoSpeed

Operating Weight

9610 to 11905 pounds

Overview

	2003 - 2007 MC SeriesUtility tractor MC Series Utility tractor

Production
Manufacturer	McCormick Intl
Utility tractor
Built in Doncaster, England

McCormick Intl MC105 Engine
Perkins 4.4L 4-cyl diesel
Engine details ...

McCormick Intl MC105 Power
Engine	102 hp 76.1 kW
PTO (claimed)	83 hp 61.9 kW

Mechanical
Two- or four-wheel drive
Differential lock	mechanical rear
Power steering
Wet disc brakes
ROPS. Cab optional

Capacity
Fuel	52 gal 196.8 L
Hydraulic system	19.8 gal 74.9 L

Hydraulics
Type	pressure flow compensated
Capacity	19.8 gal 74.9 L
Valves	2 to 4
Pump flow	28.8 gpm 109.0 lpm

Tractor hitch
Rear Type	IIN
Rear lift (at ends)	12943 lbs 5870 kg
Rear lift (at 24"/610mm)	8201 lbs 3719 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@2163
	1000@2200

Dimensions & Tires
Wheelbase	94.5 inches 240 cm
Weight	9610 to 11905 pounds
Front tire	10.0/16
Rear tire	18.4/34
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	95
Battery volts	12

References

MC Series published in 2005, by McCormick
MC Series published in 2008, by McCormick

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins 1104C-44T
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.13x5.00 inches 105 x 127 mm
Emissions	Tier 2
Power	102 hp 76.1 kW
Rated RPM	2200
Torque	306 lb-ft 414.9 Nm
Torque RPM	1400
Starter volts	12

Transmission

Transmission options
16-speed partial power shift
32-speed partial power shift

Transmission — 16 forward and 12 reverse partial power shift

Type	partial power shift
Gears	16 forward and 12 reverse
Four ranges with four power shift gears in each range.
With 18.4-38 rear tires and 40KPH transmission option.

Transmission — 32 forward and 24 reverse partial power shift

Type	partial power shift
Gears	32 forward and 24 reverse
Four ranges with four power shift gears in each range plus creeper.

Transmission — AutoSpeed

Transmission	AutoSpeed
Type	partial power shift
Gears	16 forward and 12 reverse

Dimensions

McCormick Intl MC105 Tires
2WD Ag front	10.0/16
4WD Ag front	13.6/28
Ag rear	18.4/34

Dimensions
Wheelbase	94.5 inches 240 cm
Length	169 inches 429 cm
Width	77 inches 195 cm
Ground clearance	14 inches 35 cm

McCormick Intl MC105 Weight
	9610 lbs (2WD ROPS) 4359 kg
	10198 lbs (4WD ROPS) 4625 kg
	10640 lbs (2WD cab) 4826 kg
	11905 lbs (4WD cab) 5400 kg

Photos

McCormick Intl MC105 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl MC105 based on its 102 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl MC105.

Estimated Continuous Field Runtime: 9.8 hrs

Approximately 9.8 hours of continuous field operation at ~75% rated power on a full tank (52 gal / 196.8 L).

Estimated 75% Load Fuel Burn~5.3 gal/hr (20.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours