McCormick Intl CX90

The McCormick Intl CX90 is a tractor produced by Mccormick Intl. It is equipped with a 268 ci 4.4 L engine. The listed engine power is Diesel (listed): 83 hp / 61.9 kW. Transmission: synchronized shuttle. Operating weight: 8,465.7 lbs 3840 kg.

Engine Power

Diesel (listed): 83 hp / 61.9 kW

Fuel & Capacities

40.9 gal 154.8 L

Transmission

synchronized shuttle

Operating Weight

8,465.7 lbs 3840 kg

Overview

	2008 - 2011 CX SeriesUtility tractor CX Series Utility tractor

Production
Manufacturer	McCormick Intl
Utility tractor
Built in Italy

McCormick Intl CX90 Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	40.9 gal 154.8 L
Engine details ...

McCormick Intl CX90 Power
Engine	83 hp 61.9 kW
PTO (claimed)	66 hp 49.2 kW

Mechanical
Four-wheel drive
Steering	power
Wet disc brakes
Cab standard. Optional sir-conditioning.

Hydraulics
Valves	2
Pump flow	15.8 gpm 59.8 lpm
Total flow	23.7 gpm 89.7 lpm
Steering flow	7.9 gpm 29.9 lpm

Tractor hitch
Rear Type	II
Rear lift	6,519 lbs 2957 kg
	9,038 lbs (optional) 4099 kg
Front Hitch	II (optional)
Front lift	6,613.9 lbs 3000 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
	540/750 (optional)
Front PTO	independent (optional)
Front PTO Type	1000

Dimensions & Tires
Wheelbase	92.7 inches 235 cm
Weight	8311.4 to 8465.7 pounds
Front tire	320/85R24
Rear tire	420/85R34
Full dimensions and tires ...

Engine

Engine Detail — 268 ci / 4.4 L Diesel

Manufacturer	Perkins 1104D-44T
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	268 ci 4.4 L
Bore/Stroke	4.134x5.00 inches 105 x 127 mm
Emissions	Tier 3
Power	83 hp 61.9 kW
Starter	electric
Starter volts	12

Transmission

Transmission options
24-speed power shuttle
36-speed power shuttle
8-speed 16

Transmission — Xtrashift

Transmission	Xtrashift
Type	power shuttle
Gears	24 forward and reverse
Three power shift speeds in each of four gears. High and low ranges.

Transmission — Xtrashift

Transmission	Xtrashift
Type	power shuttle
Gears	36 forward and reverse
Three power shift speeds in each of four gears. High, low, and creeper ranges.

Transmission — synchronized shuttle

Transmission	synchronized shuttle
Type	16
Gears	8 forward

Dimensions

McCormick Intl CX90 Tires
Ag front	320/85R24
Ag rear	420/85R34

Dimensions
Wheelbase	92.7 inches 235 cm
Length	166.4 inches 422 cm
Width	92.3 inches 234 cm
	77.3 inches (narrow mudguards) 196 cm
Height (cab)	107.8 inches 273 cm
	100 inches (low-profile cab) 254 cm
Weight	8,465.7 lbs 3840 kg
	8,311.4 lbs (low-profile cab) 3770 kg
Ground clearance	16.5 inches 41 cm

Photos

McCormick Intl CX90

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl CX90 based on its 83 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl CX90.

Estimated Continuous Field Runtime: 9.5 hrs

Approximately 9.5 hours of continuous field operation at ~75% rated power on a full tank (40.9 gal / 154.8 L).

Estimated 75% Load Fuel Burn~4.3 gal/hr (16.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours