McCormick Intl T105

The McCormick Intl T105 is a tractor produced by Mccormick Intl. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 98.6 hp / 73.5 kW. Transmission: 16 forward and 8 reverse. Drive type: crawler. Operating weight: 10340 lbs 4690 kg.

Engine Power

Diesel (listed): 98.6 hp / 73.5 kW

Drive & Traction

crawler

Fuel & Capacities

25.1 gal 95.0 L

Transmission

16 forward and 8 reverse

Operating Weight

10340 lbs 4690 kg

Overview

	2009 - 2013 T Crawler SeriesAgricultural Crawler tractor T Crawler Series Agricultural Crawler tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Agricultural Crawler tractor

McCormick Intl T105 Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	25.1 gal 95.0 L
Engine details ...

McCormick Intl T105 Transmission
16-speed
Transmission details ...

McCormick Intl T105 Power
Engine	98.6 hp 73.5 kW
PTO (claimed)	91 hp 67.9 kW

Mechanical
Drive	crawler
Steering	hydrostatic wet clutches
Two-post ROPS.

Hydraulics
Type	open center
Pressure	2611 psi 180.0 bar
Valves	4 to 6
Pump flow	10.2 gpm 38.6 lpm
Total flow	17.3 gpm 65.5 lpm
Steering flow	7.1 gpm 26.9 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift	5842 lbs 2649 kg
	7496 lbsOptOptional 3400 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/750 OptOptional
	540/1000 OptOptional

Dimensions & Tracks
Wheelbase	65 inches 165 cm
Weight	10340 lbs 4690 kg
17.7-inch tracks
Full dimensions and tracks ...

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins 1104D-44T
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.134x5.00 inches 105 x 127 mm
Emissions	Tier III
Power	98.6 hp 73.5 kW
Compression	18.2:1
Rated RPM	2200
Torque	283.2 lb-ft 384.0 Nm
Torque RPM	1400
Starter type	electric

Transmission

Transmission — 16 forward and 8 reverse

Gears	16 forward and 8 reverse
Clutch	cerametallic dry disc

Dimensions

McCormick Intl T105 Tracks
Width	17.7 inches 44 cm

Dimensions
Wheelbase	65 inches 165 cm
Length	137.8 inches 350 cm
Width	68.9 inches 175 cm
Height (hood)	50.8 inches 129 cm
Height (ROPS)	90.6 inches 230 cm
Weight	10340 lbs 4690 kg
Ground clearance	12.6 inches 32 cm
Gauge	51.2 inches 130 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl T105 based on its 98.6 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl T105.

Estimated Continuous Field Runtime: 4.9 hrs

Approximately 4.9 hours of continuous field operation at ~75% rated power on a full tank (25.1 gal / 95 L).

Estimated 75% Load Fuel Burn~5.1 gal/hr (19.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours