McCormick Intl T110 Max

The McCormick Intl T110 Max is a tractor produced by Mccormick Intl. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 102 hp / 76.1 kW. Transmission: 36 forward and 12 reverse. Operating weight: 8047 to 8378 pounds.

Engine Power

Diesel (listed): 102 hp / 76.1 kW

Fuel & Capacities

26.9 gal 101.8 L

Transmission

36 forward and 12 reverse

Operating Weight

8047 to 8378 pounds

Overview

	2009 - 2013 T Max SeriesUtility tractor T Max Series Utility tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Utility tractor
Built in Italy

McCormick Intl T110 Max Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	26.9 gal 101.8 L
Engine details ...

McCormick Intl T110 Max Power
Engine	102 hp 76.1 kW
PTO (claimed)	86.5 hp 64.5 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic
Power steering
Wet disc brakes
Two-post ROPS. Cab available with air-conditioning.

Hydraulics
Type	open center
Pump flow	13.8 gpm 52.2 lpm
Steering flow	7.9 gpm 29.9 lpm

Tractor hitch
Rear Type	II
Rear lift	9590 lbs 4350 kg
Front Hitch	II
Front lift	3968 lbs 1799 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic wet disc
Rear PTO Type	540/1000
Front PTO	independent
Front PTO Type	1000

Dimensions & Tires
Wheelbase	92 inches 233 cm
Weight	8047 to 8378 pounds
Front tire	380/70R24
Rear tire	480/70R34
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins 1104D-44T
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.134x5.00 inches 105 x 127 mm
Emissions	Tier III
Power	102 hp 76.1 kW
Rated RPM	2200
Torque	307 lb-ft 416.3 Nm
Torque RPM	1400
Starter	electirc
Starter volts	12

Transmission

Transmission options
24-speed
12-speed power shuttle
36-speed three-speed power shift

Transmission — 24 forward and 12 reverse

Gears	24 forward and 12 reverse
Clutch	330mm mechanical dry disc

Transmission — 12 forward and reverse power shuttle

Type	power shuttle
Gears	12 forward and reverse
Clutch	wet disc

Transmission — 36 forward and 12 reverse three-speed power shift

Type	three-speed power shift
Gears	36 forward and 12 reverse
Clutch	wet disc

Dimensions

McCormick Intl T110 Max Tires
Ag front	380/70R24
Ag rear	480/70R34

Dimensions
Wheelbase	92 inches 233 cm
Length	164 inches 416 cm
Width	83 inches*Minimum 210 cm
Height (cab)	101 inches 256 cm
ROPS Weight	8047 lbs 3650 kg
Cab Weight	8378 lbs 3800 kg
Ground clearance	19 inches 48 cm

Photos

McCormick T110 Max, right side.

McCormick T110 Max, left side.

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl T110 Max based on its 102 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl T110 Max.

Estimated Continuous Field Runtime: 5.1 hrs

Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (26.9 gal / 101.8 L).

Estimated 75% Load Fuel Burn~5.3 gal/hr (20.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours