McCormick Intl TTX210

The McCormick Intl TTX210 is a tractor produced by Mccormick Intl. It is equipped with a 410.6 ci 6.7 L engine. The listed engine power is Diesel (listed): 198 hp / 147.6 kW. Transmission: XtraSpeed. Operating weight: 15884 lbs 7204 kg.

Engine Power

Diesel (listed): 198 hp / 147.6 kW

Fuel & Capacities

92 gal 348.2 L

Transmission

XtraSpeed

Operating Weight

15884 lbs 7204 kg

Overview

	2007 - 2013 TTX SeriesRow-Crop tractor TTX Series Row-Crop tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Row-Crop tractor
Built in Fabbrico, Italy

McCormick Intl TTX210 Engine
Iveco 6.7L 6-cyl diesel
Fuel tank	92 gal 348.2 L
Engine details ...

McCormick Intl TTX210 Power
Engine	198 hp 147.6 kW
PTO (claimed)	187 hp 139.4 kW

Mechanical
Four-wheel drive
Power steering
Wet disc brakes
Cab standard with heat and air-conditioning. Optional hydraulic suspension.

Hydraulics
Type	closed center
Valves	3 to 5
Total flow	34 gpm 128.7 lpm
	43 gpmOptOptional 162.8 lpm

Tractor hitch
Rear Type	III
Rear lift	24141 lbs 10950 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	113 inches 287 cm
Weight	15884 lbs 7204 kg
Front tire	540/65R30
Rear tire	650/65R42
Full dimensions and tires ...

References

TTX published in 2009, by McCormick

Engine

Engine Detail — 410.6 ci / 6.7 L Diesel

Manufacturer	Iveco
Configuration	turbocharged diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	410.6 ci 6.7 L
Bore/Stroke	4.094x5.197 inches 104 x 132 mm
Power	198 hp 147.6 kW
Rated RPM	2200
Torque	590 lb-ft 800.0 Nm

Transmission

Transmission options
32-speed partial power shift
48-speed partial power shift

Transmission — XtraSpeed

Transmission	XtraSpeed
Type	partial power shift
Gears	32 forward and 24 reverse
Four ranges with eight power shift gears in each range. Power shuttle.

Transmission — XtraSpeed

Transmission	XtraSpeed
Type	partial power shift
Gears	48 forward and 40 reverse
Four ranges with eight power shift gears in each range plus creeper. Power shuttle.

Dimensions

McCormick Intl TTX210 Tires
Ag front	540/65R30
Ag rear	650/65R42

Dimensions
Wheelbase	113 inches 287 cm
Length	209 inches 530 cm
Width	95 inches 241 cm
Height (cab)	118 inches 299 cm
Weight	15884 lbs 7204 kg
Ground clearance	18 inches 45 cm

Photos

McCormick Intl TTX210

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl TTX210 based on its 198 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl TTX210.

Estimated Continuous Field Runtime: 8.9 hrs

Approximately 8.9 hours of continuous field operation at ~75% rated power on a full tank (92 gal / 348.3 L).

Estimated 75% Load Fuel Burn~10.3 gal/hr (39 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours