McCormick Intl X10.40M

The McCormick Intl X10.40M is a tractor produced by Mccormick Intl. It is equipped with a 122 ci 2.0 L engine. The listed engine power is Diesel (gross): 41 hp / 30.6 kW. Transmission: 12 forward and reverse. Operating weight: 3,924 lbs 1779 kg.

Engine Power

Diesel (gross): 41 hp / 30.6 kW

Fuel & Capacities

11.9 gal 45.0 L

Transmission

12 forward and reverse

Operating Weight

3,924 lbs 1779 kg

Overview

	2011 - 2014 X10 SeriesCompact Utility tractorDaedong built X10 Series Compact Utility tractor Daedong built

Production
Distributor	McCormick Intl
Manufacturer	Daedong
Compact Utility tractor
Built in South Korea

Variants
X10.40M	gear
X10.40H	hydrostatic

McCormick Intl X10.40M Engine
Daedong 2.0L 4-cyl diesel
Fuel tank	11.9 gal 45.0 L
Engine details ...

McCormick Intl X10.40M Transmission
12-speed synchronized shuttle
Transmission details ...

McCormick Intl X10.40M Power
Engine (gross)	41 hp 30.6 kW
PTO (claimed)	34 hp 25.4 kW

Mechanical
Four-wheel drive
Differential lock	rear standard
Steering	hydrostatic power
Wet disc brakes
Two-post foldable ROPS.

Hydraulics
Type	gear pump
Valves	1 or 2
Pump flow	16.8 gpm 63.6 lpm

Tractor hitch
Rear Type	I
Control	position and draft control
Rear lift (at 24"/610mm)	2,493 lbs 1130 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540
Mid PTO	optional
Mid PTO Type	2000

Dimensions & Tires
Wheelbase	74 inches 187 cm
Weight	3,924 lbs 1779 kg
Front tire	8-16
Rear tire	13.6-24
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 122 ci / 2.0 L Diesel

Manufacturer	Daedong 4A200
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled vertical inline
Displacement	122 ci 2.0 L
Bore/Stroke	3.27x3.64 inches 83 x 92 mm
Power (gross)	41 hp 30.6 kW
Fuel system	indirect injection
Rated RPM	2600
Starter	electric
Starter volts	12

McCormick Intl X10.40M Engine

Transmission

Transmission — 12 forward and reverse synchronized shuttle

Type	synchronized shuttle
Gears	12 forward and reverse
Clutch	dry disc

Dimensions

McCormick Intl X10.40M Tires
Ag front	8-16
Ag rear	13.6-24
Lawn/turf front	29x12.5-15
Lawn/turf rear	21.5L-16.1
Industrial front	10x16.5
Industrial rear	14.9x24

Dimensions
Wheelbase	74 inches 187 cm
Length	134.2 inches 340 cm
Width	63.9 inches 162 cm
Height (ROPS)	95 inches 241 cm
Weight	3,924 lbs 1779 kg
Ground clearance	14.7 inches 37 cm
Front tread	49.1 inches 124 cm
Rear tread	49.7 to 58.6 inches 126 to 148 cm

Photos

McCormick Intl X10.40M

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl X10.40M based on its 41 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl X10.40M.

Estimated Continuous Field Runtime: 5.6 hrs

Approximately 5.6 hours of continuous field operation at ~75% rated power on a full tank (11.9 gal / 45 L).

Estimated 75% Load Fuel Burn~2.1 gal/hr (8.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours