McCormick Intl X10.35M

The McCormick Intl X10.35M is a tractor produced by Mccormick Intl. It is equipped with a 100.5 ci 1.6 L engine. The listed engine power is Diesel (gross): 34 hp / 25.4 kW. Transmission: 8 forward and reverse. Operating weight: 3,151 lbs 1429 kg.

Engine Power

Diesel (gross): 34 hp / 25.4 kW

Fuel & Capacities

7.9 gal 29.9 L

Transmission

8 forward and reverse

Operating Weight

3,151 lbs 1429 kg

Overview

	2011 - 2014 X10 SeriesCompact Utility tractorDaedong built X10 Series Compact Utility tractor Daedong built

Production
Distributor	McCormick Intl
Manufacturer	Daedong
Compact Utility tractor
Built in South Korea

Variants
X10.35H	hydrostatic
X10.35M	gear drive

McCormick Intl X10.35M Engine
Daedong 1.6L 3-cyl diesel
Fuel tank	7.9 gal 29.9 L
Engine details ...

McCormick Intl X10.35M Transmission
8-speed synchronized shuttle
Transmission details ...

McCormick Intl X10.35M Power
Engine (gross)	34 hp 25.4 kW
PTO (claimed)	27.6 hp 20.6 kW

Mechanical
Four-wheel drive
Differential lock	rear standard
Steering	hydrostatic power
Wet disc brakes
Two-post foldable ROPS.

Hydraulics
Type	gear pump
Valves	1
Pump flow	12.7 gpm 48.1 lpm

Tractor hitch
Rear Type	I
Control	position control
Rear lift (at 24"/610mm)	1,764 lbs 800 kg

Power Take-off (PTO)
Rear PTO	live
Rear PTO Type	540
	1000 (optional)
Mid PTO	optional
Mid PTO Type	2000

Dimensions & Tires
Wheelbase	66.1 inches 167 cm
Weight	3,151 lbs 1429 kg
Front tire	7-14
Rear tire	11.2-24
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 100.5 ci / 1.6 L Diesel

Manufacturer	Daedong 3A165
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled vertical inline
Displacement	100.5 ci 1.6 L
Power (gross)	34 hp 25.4 kW
Rated RPM	2600
Starter	electric
Starter volts	12

Transmission

Transmission — 8 forward and reverse synchronized shuttle

Type	synchronized shuttle
Gears	8 forward and reverse
Clutch	dual stage dry

Dimensions

McCormick Intl X10.35M Tires
Ag front	7-14
Ag rear	11.2-24
Lawn/turf front	27x8.5-15
Lawn/turf rear	41x14-20
Industrial front	25x8.5-14
Industrial rear	15x19.5

Dimensions
Wheelbase	66.1 inches 167 cm
Length	122.2 inches 310 cm
Width	54.6 inches 138 cm
Height (ROPS)	96.8 inches 245 cm
Weight	3,151 lbs 1429 kg
Ground clearance	13.82 inches 35 cm
Front tread	43.5 inches 110 cm
Rear tread	38.2 to 51.3 inches 97 to 130 cm

Photos

McCormick Intl X10.35M tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl X10.35M based on its 34 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl X10.35M.

Estimated Continuous Field Runtime: 4.5 hrs

Approximately 4.5 hours of continuous field operation at ~75% rated power on a full tank (7.9 gal / 29.9 L).

Estimated 75% Load Fuel Burn~1.8 gal/hr (6.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours