McCormick Intl X5.50

The McCormick Intl X5.50 is a tractor produced by Mccormick Intl. It is equipped with a 207.5 ci 3.4 L engine. The listed engine power is Diesel (listed): 113 hp / 84.3 kW. Transmission: Xtrashift. Operating weight: 7930 to 8598 pounds.

Engine Power

Diesel (listed): 113 hp / 84.3 kW

Fuel & Capacities

27.2 gal 103.0 L

Transmission

Xtrashift

Operating Weight

7930 to 8598 pounds

Overview

	2015 - X5 SeriesUtility tractor
2015 -
X5 Series
Utility tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Utility tractor
Built in Italy

McCormick Intl X5.50 Engine
Perkins 3.4L 4-cyl diesel
ROPS Fuel tank	27.2 gal 103.0 L
Cab Fuel tank	32 gal 121.1 L
Engine details ...

McCormick Intl X5.50 Power
Engine	113 hp 84.3 kW
PTO (claimed)	97.5 hp 72.7 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic
Power steering
Wet disc brakes
Two-post ROPS. Cab available with air-conditioning.

Hydraulics
Type	open center
Pressure	2600 psi 179.3 bar
Valves	2 to 4
Pump flow	16.6 gpm 62.8 lpm
Steering flow	7.9 gpm 29.9 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift	10450 lbs 4740 kg
Front Hitch	II
Front lift	4630 lbs 2100 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/750
	540/1000
	540/750/1000
Front PTO	independent
Front PTO Type	1000

Dimensions & Tires
Wheelbase	91.3 inches 231 cm
Weight	7930 to 8598 pounds
Front tire	380/70R24
Rear tire	480/70R34
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 207.5 ci / 3.4 L Diesel

Manufacturer	Perkins 854E-E34TA
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	207.5 ci 3.4 L
Bore/Stroke	3.90x4.33 inches 99 x 110 mm
Emissions	Interim Tier IV
Emission control	exhaust gas recirculation (EGR)
Power	113 hp 84.3 kW
Fuel system	common rail
Compression	17:1
Rated RPM	2200
Torque	332 lb-ft 450.2 Nm
Torque RPM	1400
Starter	electirc
Starter volts	12

Transmission

Transmission options
12-speed
36-speed three-speed power shift

Transmission — Speed Four

Transmission	Speed Four
Gears	12 forward and reverse
Clutch	330mm mechanical dry disc

Transmission — Xtrashift

Transmission	Xtrashift
Type	three-speed power shift
Gears	36 forward and 12 reverse
Clutch	wet disc

Dimensions

McCormick Intl X5.50 Tires
Ag front	380/70R24
Ag rear	480/70R34

Dimensions
Wheelbase	91.3 inches 231 cm
Length	163.1 inches 414 cm
Width	83.5 inches*Minimum 212 cm
Height (ROPS)	101 inches 256 cm
Height (cab)	105.5 inches 267 cm
ROPS Weight	7930 lbs 3597 kg
Cab Weight	8598 lbs 3900 kg
Flange rear axle
Front tread	56 to 77.5 inches 142 to 196 cm
Rear tread	65.5 to 79 inches 166 to 200 cm

Photos

McCormick Intl X5.50 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl X5.50 based on its 113 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl X5.50.

Estimated Continuous Field Runtime: 4.6 hrs

Approximately 4.6 hours of continuous field operation at ~75% rated power on a full tank (27.2 gal / 103 L).

Estimated 75% Load Fuel Burn~5.9 gal/hr (22.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours