Massey Ferguson 2620

The Massey Ferguson 2620 is a tractor produced by Massey Ferguson. It is equipped with a 353.8 ci 5.8 L engine. The listed engine power is Diesel (listed): 102 hp / 76.1 kW. Transmission: 16 forward and 12 reverse. Operating weight: 11,710 lbs 5311 kg.

Engine Power

Diesel (listed): 102 hp / 76.1 kW

Fuel & Capacities

56.3 gal 213.1 L

Transmission

16 forward and 12 reverse

Operating Weight

11,710 lbs 5311 kg

Overview

	1981 - 1985 2000 SeriesRow-Crop tractor 2000 Series Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor

Massey Ferguson 2620 Engine
Perkins 5.8L 6-cyl diesel
Fuel tank	56.3 gal 213.1 L
Engine details ...

Massey Ferguson 2620 Transmission
16-speed
Transmission details ...

Massey Ferguson 2620 Power
Engine	102 hp 76.1 kW

Mechanical
Two- or four-wheel drive
Power steering
Wet disc brakes
Cab standard.

Hydraulics
Total flow	14.5 gpm 54.9 lpm

Tractor hitch
Rear lift	9,921 lbs 4500 kg
	11,750 lbs 5329 kg

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	107.5 inches 273 cm
Weight	11,710 lbs 5311 kg
Front tire	10.00-16
Rear tire	16.9-38
Full dimensions and tires ...

Engine

Engine Detail — 353.8 ci / 5.8 L Diesel

Manufacturer	Perkins A6.354.4
Fuel Type	Diesel
Configuration	6-cylinder, liquid-cooled
Displacement	353.8 ci 5.8 L
Bore/Stroke	3.875x5.00 inches 98 x 127 mm
Power	102 hp 76.1 kW
Rated RPM	2000
Torque	259.6 lb-ft 352.0 Nm
Torque RPM	1250

Transmission

Transmission — 16 forward and 12 reverse

Gears

16 forward and 12 reverse

Dimensions

Massey Ferguson 2620 Tires
Ag front	10.00-16 (2WD)
	12.4-28 (4WD)
Ag rear	16.9-38

Dimensions
Wheelbase	107.5 inches 273 cm
Length	200.4 inches 509 cm
Height (cab)	110.6 inches 280 cm
Weight	11,710 lbs 5311 kg

Photos

Massey Ferguson 2620, right side.

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 2620 based on its 102 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 2620.

Estimated Continuous Field Runtime: 10.6 hrs

Approximately 10.6 hours of continuous field operation at ~75% rated power on a full tank (56.3 gal / 213.1 L).

Estimated 75% Load Fuel Burn~5.3 gal/hr (20.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours