McCormick Intl X6.460

The McCormick Intl X6.460 is a tractor produced by Mccormick Intl. It is equipped with a 274.6 ci 4.5 L engine. The listed engine power is Diesel (gross): 131 hp / 97.7 kW. Transmission: T-Tronic. Operating weight: 13200 lbs 5987 kg.

Engine Power

Diesel (gross): 131 hp / 97.7 kW

Fuel & Capacities

71.3 gal 269.9 L

Transmission

T-Tronic

Operating Weight

13200 lbs 5987 kg

Overview

	2014 - X6 Series
2014 -
X6 Series

Production
Manufacturer	McCormick Intl (a part of Argo)

McCormick Intl X6.460 Engine
BetaPower 4.5L 4-cyl diesel
Fuel tank	71.3 gal 269.9 L
Exhaust fluid (DEF)	10 gal 37.9 L
Engine details ...

McCormick Intl X6.460 Power
Engine (gross)	131 hp 97.7 kW
Engine (max)	143 hp 106.6 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic
Wet disc brakes
Trailer brakes	hydraulic OptOptional
	pneumatic OptOptional
Cab standard with air-conditioning. Optional pneumatic seat suspension.

Hydraulics
Valves	3 to 5
Pump flow	23 gpm 87.1 lpm

Tractor hitch
Rear Type	III/II
Control	position and draft control
Rear lift	15400 lbs 6985 kg
Front Hitch	II
Front lift	7700 lbs 3492 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic wet disc
Rear PTO Type	540/1000
Front PTO	independent OptOptional
Front PTO Type	1000

Dimensions & Tires
Wheelbase	107 inches 271 cm
Weight	13200 lbs 5987 kg
Front tire	480/65R28
Rear tire	650/65R38
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 274.6 ci / 4.5 L Diesel

Manufacturer	BetaPower
Fuel Type	Diesel
Configuration	4-cylinder 16-valve, liquid-cooled
Displacement	274.6 ci 4.5 L
Bore/Stroke	4.09x5.20 inches 104 x 132 mm
Emissions	Interim Tier IV
Emission control	selective catalytic reduction (SCR)
Rated Power (gross)	131 hp 97.7 kW
Maximum Power (gross)	143 hp 106.6 kW
Rated RPM	2200
Torque	435.2 lb-ft 590.1 Nm
Torque RPM	1500
Starter	electric
Starter volts	12

Transmission

Transmission options
18-speed
54-speed

Transmission — 18 forward and reverse

Gears	18 forward and reverse
Clutch	dry disc

Transmission — T-Tronic

Transmission	T-Tronic
Gears	54 forward and 18 reverse

Dimensions

McCormick Intl X6.460 Tires
Ag front	480/65R28
Ag rear	650/65R38

Dimensions
Wheelbase	107 inches 271 cm
Length	207 inches 525 cm
Width	87 inches*Minimum 220 cm
Height (cab)	110 inches 279 cm
Weight	13200 lbs 5987 kg

Photos

McCormick Intl X6.460 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl X6.460 based on its 131 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl X6.460.

Estimated Continuous Field Runtime: 10.5 hrs

Approximately 10.5 hours of continuous field operation at ~75% rated power on a full tank (71.3 gal / 269.9 L).

Estimated 75% Load Fuel Burn~6.8 gal/hr (25.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours