Deutz-Fahr 5125
The Deutz-Fahr 5125 is a tractor produced by Deutz Fahr. It is equipped with a 220.9 ci 3.6 L engine. The listed engine power is Diesel (gross): 118 hp / 88.0 kW. Transmission: SDF. Operating weight: 9921 lbs 4500 kg.
Engine Power
Diesel (gross): 118 hp / 88.0 kW
Fuel & Capacities
35.7 gal
135.1 L
Transmission
SDF
Operating Weight
9921 lbs
4500 kg
Overview
 | 2017 -
5 SeriesUtility tractor |
|---|---|
2017 - | |
5 Series | |
Utility tractor | |
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Utility tractor | |
Deutz-Fahr 5125 Engine | |
|---|---|
Deutz 3.6L 4-cyl diesel | |
Fuel tank | 35.7 gal
135.1 L |
Exhaust fluid (DEF) | 2.1 gal
7.9 L |
Engine details ...  | |
Deutz-Fahr 5125 Power | |
|---|---|
Engine (gross) | 118 hp
88.0 kW |
Engine (max) | 124.5 hp
92.8 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | electro-hydraulic front and rear |
Power steering | |
Wet disc brakes | |
Trailer brakes | hydraulic OptOptional |
pneumatic OptOptional | |
Cab standard with available air-conditioning. | |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 14.5 gpm
54.9 lpm |
15.85 gpmOptOptional
60.0 lpm | |
23.8 gpmOptOptional
90.1 lpm | |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 7540 lbs
3420 kg |
10395 lbsOptOptional
4715 kg | |
11596 lbsOptOptional
5259 kg | |
Front lift | 4630 lbs
2100 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic |
Rear PTO Type | 540/540E |
1000/1000E OptOptional | |
Front PTO | independent OptOptional |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 91.7 inches
232 cm |
4WD Wheelbase | 93.3 inches
236 cm |
Weight | 9921 lbs
4500 kg |
Front tire | 340/85R28 |
Rear tire | 420/85R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 150 |
Charging volts | 12 |
Battery CCA | 650 |
Battery volts | 12 |
Battery AH | 100 |
References | |
|---|---|
 | |
5 Series published in 2016, by Deutz-Fahr |
Engine
Engine Detail — 220.9 ci / 3.6 L Diesel
Manufacturer | Deutz TCD 3.6 L04 |
Configuration | turbocharged intercooled diesel, 4-cylinder, liquid-cooled |
Displacement | 220.9 ci
3.6 L |
Bore/Stroke | 3.86x4.72 inches
98 x 120 mm |
Rated Power (gross) | 118 hp
88.0 kW |
Maximum Power (gross) | 124.5 hp
92.8 kW |
Rated RPM | 2000 |
Torque | 368.8 lb-ft
500.1 Nm |
Torque RPM | 1600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
20-speed partial power shift | |
30-speed partial power shift |
Transmission — SDF
Transmission | SDF |
Type | partial power shift |
Gears | 20 forward and reverse |
Five gears in two ranges with two-speed power shift and power shuttle. Also available with additional under-drive and super-creeper ranges, providing 40 total speeds in each direction. | |
Transmission — SDF
Transmission | SDF |
Type | partial power shift |
Gears | 30 forward and reverse |
Five gears in two ranges with three-speed power shift and power shuttle. Also available with additional under-drive and super-creeper ranges, providing 60 total speeds in each direction. | |
Dimensions
Deutz-Fahr 5125 Tires | |
|---|---|
Standard tires (ag) | Front: 340/85R28. Rear: 420/85R38 |
Optional tires (ag) | Front: 440/65R28. Rear: 540/65R38 |
Dimensions | |
|---|---|
2WD Wheelbase | 91.7 inches
232 cm |
4WD Wheelbase | 93.3 inches
236 cm |
Length | 163.2 inches
414 cm |
Width | 85.4 inches*Minimum width.
216 cm |
Height | 108.7 inches
276 cm |
Deutz-Fahr 5125 Weight | |
|---|---|
Shipping | 9921 lbs
4500 kg |
2WD Max capacity | 11684 lbs
5299 kg |
4WD Max capacity | 16535 lbs
7500 kg |
Photos
Deutz-Fahr 5125 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr 5125 based on its 118 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr 5125.
Estimated Continuous Field Runtime: 5.8 hrs
Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (35.7 gal / 135.1 L).
Estimated 75% Load Fuel Burn~6.1 gal/hr (23.2 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr 5125 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr 5125.
Converted Equivalents:
Horsepower (HP)118 hp
Kilowatts (kW)88 kW
Metric Horsepower (PS / CV)119.6 PS
Direct Competitor Comparison
Compare Deutz-Fahr 5125 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr 5125
Engine Power:Diesel (gross): 118 hp / 88.0 kW
★ Baseline Reference
Related models
Deutz-Fahr 4.71
- Power:
- 95
- Production years:
- 1990 - 1993
Deutz-Fahr 4.95
- Power:
- 95
- Production years:
- 1995 - 1997
Deutz-Fahr 6.00
- Power:
- 95
- Production years:
- 1995 - 1997
Deutz-Fahr Agrotron 100 MK3
- Power:
- 95
- Production years:
- 2001 - 2003
Deutz-Fahr 4100E
- Power:
- 95.2
- Production years:
- 2018 - 2026