McCormick Intl X70.80

The McCormick Intl X70.80 is a tractor produced by Mccormick Intl. It is equipped with a 410.6 ci 6.7 L engine. The listed engine power is Diesel (listed): 214 hp / 159.6 kW. Transmission: Xtraspeed Creeper. Operating weight: 16980 lbs 7702 kg.

Engine Power

Diesel (listed): 214 hp / 159.6 kW

Fuel & Capacities

92.5 gal 350.1 L

Transmission

Xtraspeed Creeper

Operating Weight

16980 lbs 7702 kg

Overview

	2012 - X70 SeriesRow-Crop tractor
2012 -
X70 Series
Row-Crop tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Row-Crop tractor

McCormick Intl X70.80 Engine
BetaPower 6.7L 6-cyl diesel
Fuel tank	92.5 gal 350.1 L
Exhaust fluid (DEF)	10 gal 37.9 L
Engine details ...

McCormick Intl X70.80 Power
Engine	214 hp 159.6 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic rear
	limited-slip front
Steering	hydrostatic power
Wet disc brakes
Cab standard with air-conditioning. Optional electro-hydraulic cab suspension.

Hydraulics
Valves	3 to 4
Pump flow	34.3 gpm 129.8 lpm
	43.1 gpm (optional) 163.1 lpm

Tractor hitch
Rear Type	III
Rear lift	24140 lbs 10949 kg
Front Hitch	optional

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic wet disc
Rear PTO Type	540/1000
Front PTO	independent (optional)

Dimensions & Tires
Wheelbase	113.1 inches 287 cm
Weight	16980 lbs 7702 kg
Front tire	540/65R30
Rear tire	650/65R42
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 410.6 ci / 6.7 L Diesel

Manufacturer	BetaPower
Configuration	turbocharged diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	410.6 ci 6.7 L
Bore/Stroke	4.094x5.197 inches 104 x 132 mm
Emissions	Interim Tier 4
Emission control	selective catalytic reduction (SCR)
Power	214 hp 159.6 kW
Maximum Power	232 hp 173.0 kW
Fuel system	high pressure common rail
Rated RPM	2200
Torque	672.7 lb-ft 912.2 Nm
Starter	electric
Starter volts	12

Transmission

Transmission options
32-speed eight-speed power shift
48-speed

Transmission — Xtraspeed

Transmission	Xtraspeed
Type	eight-speed power shift
Gears	32 forward and 24 reverse
Transmission	Xtraspeed Creeper
Gears	48 forward and 40 reverse

Dimensions

McCormick Intl X70.80 Tires
Standard tires (ag)	Front: 540/65R30. Rear: 650/65R42

Dimensions
Wheelbase	113.1 inches 287 cm
Length	209 inches 530 cm
Width	95.1 inches 241 cm
Height (cab)	118.1 inches 299 cm
Weight	16980 lbs 7702 kg
Ground clearance	18.5 inches 46 cm
Front axle	4WD
Front axle	4WD hydraulic suspension

Photos

McCormick Intl X70.80 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl X70.80 based on its 214 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl X70.80.

Estimated Continuous Field Runtime: 8.3 hrs

Approximately 8.3 hours of continuous field operation at ~75% rated power on a full tank (92.5 gal / 350.2 L).

Estimated 75% Load Fuel Burn~11.1 gal/hr (42.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours