McCormick Intl MTX175

The McCormick Intl MTX175 is a tractor produced by Mccormick Intl. It is equipped with a 365 ci 6.0 L engine. The listed engine power is Diesel (listed): 176 hp / 131.2 kW. Transmission: 32 forward and 24 reverse. Operating weight: 14880 to 16560 pounds.

Engine Power

Diesel (listed): 176 hp / 131.2 kW

Fuel & Capacities

91.7 gal 347.1 L

Transmission

32 forward and 24 reverse

Operating Weight

14880 to 16560 pounds

Overview

	2000 - 2003 MTX SeriesRow-Crop tractor MTX Series Row-Crop tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Row-Crop tractor
Built in Doncaster, England

McCormick Intl MTX175 Engine
Perkins 6.0L 6-cyl diesel
Fuel tank	91.7 gal 347.1 L
Engine details ...

McCormick Intl MTX175 Power
Engine	176 hp 131.2 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic rear
Power steering
Hydraulic wet disc brakes
Cab standard with air-conditioning.

Hydraulics
Type	pressure flow compensating
Pump flow	32 gpm 121.1 lpm
SCV flow	28 gpm 106.0 lpm

Tractor hitch
Rear Type	III
Control	electronic lower link draft sensing
Rear lift (at 24"/610mm)	15290 lbs 6935 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@1877
	1000@2200

Dimensions & Tires
Wheelbase	112.2 inches 284 cm
Weight	14880 to 16560 pounds
Front tire	540/65R30
Rear tire	650/65R42
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	95
Battery volts	12

References

MTX Series published in 2000, by McCormick

Engine

Engine Detail — 365 ci / 6.0 L Diesel

Manufacturer	Perkins 1006-60TWI
Configuration	turbocharged intercooled diesel, 6-cylinder, liquid-cooled inline
Displacement	365 ci 6.0 L
Bore/Stroke	3.937x5.00 inches 100 x 127 mm
Power	176 hp 131.2 kW
Rated RPM	2200
Torque	512.6 lb-ft 695.1 Nm
Torque RPM	1400
Starter	electric
Starter volts	12
Oil change	300 h

Transmission

Transmission options
16-speed four-speed power shift
32-speed creeper

Transmission — 16 forward and 12 reverse four-speed power shift

Type	four-speed power shift
Gears	16 forward and 12 reverse
Clutch	electro-hydraulic wet disc
Four power shift gears in four ranges.
Transmission
Type	creeper
Gears	32 forward and 24 reverse

Dimensions

McCormick Intl MTX175 Tires
Ag front	540/65R30
Ag rear	650/65R42

Dimensions
Wheelbase	112.2 inches 284 cm
Length	205.9 inches 522 cm
Width	90.6 inches 230 cm
Height (cab)	117.7 inches 298 cm

McCormick Intl MTX175 Weight
	16560 lbs 7511 kg
Shipping	14880 lbs 6749 kg
Max front axle	15650 lbs 7098 kg
Max rear axle	35710 lbs 16198 kg

Photos

McCormick Intl MTX175 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl MTX175 based on its 176 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl MTX175.

Estimated Continuous Field Runtime: 10 hrs

Approximately 10 hours of continuous field operation at ~75% rated power on a full tank (91.7 gal / 347.1 L).

Estimated 75% Load Fuel Burn~9.2 gal/hr (34.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours