Mitsubishi GSK20

The Mitsubishi GSK20 is a tractor produced by Mitsubishi. It is equipped with a 83.2 ci 1.4 L engine. The listed engine power is Diesel (listed): 19.7 hp / 14.7 kW. Transmission: 12 forward and reverse. Drive type: half-track. Operating weight: 2877 lbs 1305 kg.

Engine Power

Diesel (listed): 19.7 hp / 14.7 kW

Drive & Traction

half-track

Fuel & Capacities

6.6 gal 25.0 L

Transmission

12 forward and reverse

Operating Weight

2877 lbs 1305 kg

Overview

	2003 - 2005 GS SeriesHalf-track Crawler tractor GS Series Half-track Crawler tractor

Production
Manufacturer	Mitsubishi
Half-track Crawler tractor

Mitsubishi GSK20 Engine
Isuzu 1.4L 3-cyl diesel
Fuel tank	6.6 gal 25.0 L
Engine details ...

Mitsubishi GSK20 Transmission
12-speed
Transmission details ...

Mitsubishi GSK20 Power
Engine	19.7 hp 14.7 kW

Mechanical
Drive	half-track
Power steering
Wet disc brakes
Two-post ROPS.

Tractor hitch
Rear Type	JIS0

Power Take-off (PTO)
Rear PTO Type	540 (1.375)
Engine RPM	523@2500
	819@2500
	1266@2500
	-505@2500
	-792@2500
	-1224@2500

Dimensions & Tires
Wheelbase	59.1 inches 150 cm
Weight	2877 lbs 1305 kg
Front tire	7-14
Rear tire	tracks
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 83.2 ci / 1.4 L Diesel

Manufacturer	Isuzu E3CC
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	83.2 ci 1.4 L
Power	19.7 hp 14.7 kW
Rated RPM	2500
Starter	electric
Starter volts	12

Transmission

Transmission — 12 forward and reverse

Gears	12 forward and reverse
Clutch	dry disc

Dimensions

Mitsubishi GSK20 Tires
Ag front	7-14
Ag rear	400mm tracks

Dimensions
Wheelbase	59.1 inches 150 cm
Length	112.2 inches 284 cm
Width	54.3 inches 137 cm
Height (ROPS)	77.6 inches 197 cm
Weight	2877 lbs 1305 kg
Ground clearance	16.5 inches 41 cm
Front tread	37.8 inches 96 cm
Rear tread	38.6 inches 98 cm

Photos

Mitsubishi GSK20 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mitsubishi GSK20 based on its 19.7 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mitsubishi GSK20.

Estimated Continuous Field Runtime: 6.4 hrs

Approximately 6.4 hours of continuous field operation at ~75% rated power on a full tank (6.6 gal / 25 L).

Estimated 75% Load Fuel Burn~1 gal/hr (3.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours