Mitsubishi MT250

The Mitsubishi MT250 is a tractor produced by Mitsubishi. It is equipped with a 78.7 ci 1.3 L engine. The listed engine power is Diesel (listed): 25 hp / 18.6 kW. Transmission: 9 forward and 3 reverse. Operating weight: 1940 to 2040 pounds.

Engine Power

Diesel (listed): 25 hp / 18.6 kW

Fuel & Capacities

5 gal 18.9 L

Transmission

9 forward and 3 reverse

Operating Weight

1940 to 2040 pounds

Overview

	1984 - 1991

Production
Manufacturer	Mitsubishi

Variants
MT250	2WD
MT250D	4WD

Mitsubishi MT250 Engine
Mitsubishi 1.3L 3-cyl diesel
Fuel tank	5 gal 18.9 L
Engine details ...

Mitsubishi MT250 Transmission
9-speed synchromesh
Transmission details ...

Mitsubishi MT250 Power
Engine	25 hp 18.6 kW
PTO (claimed)	22 hp 16.4 kW

Mechanical
Two- or four-wheel drive
Differential lock	mechanical rear
Steering	manual
Steering	power OptOptional
Mechanical drum brakes
Open operator station. Two-post fixed ROPS available.

Hydraulics
Type	open center
Pump flow	4.6 gpm 17.4 lpm

Tractor hitch
Rear Type	I
Control	position control
Rear lift	1499 lbs 679 kg

Power Take-off (PTO)
Rear PTO	live
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@2479
	1000@2180

Dimensions & Tires
Wheelbase	60 inches 152 cm
Weight	1940 to 2040 pounds
Front tire	5.00-15
2WD Rear tire	11.2/10-24
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12
Battery AH	65

References

MT210/MT250 published in 1985, by Mitsubishi

Engine

Engine Detail — 78.7 ci / 1.3 L Diesel

Manufacturer	Mitsubishi K3H
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	78.7 ci 1.3 L
Bore/Stroke	3.071x3.543 inches 78 x 90 mm
Power	25 hp 18.6 kW
Air cleaner	dry
Rated RPM	2700
Starter	electric
Starter volts	12

Transmission

Transmission — 9 forward and 3 reverse synchromesh

Type	synchromesh
Gears	9 forward and 3 reverse
Clutch	dry disc
With 11.2-24 rear tires.

Dimensions

Mitsubishi MT250 Tires
2WD Standard tires (ag)	Front: 5.00-15. Rear: 11.2/10-24
4WD Standard tires (ag)	Front: 7-14. Rear: 11.2-10-24
4WD Optional tires (ag)	Front: 5-14. Rear: 12.4-16
2WD Lawn/turf front	20x8.00-10
4WD Lawn/turf front	24x8.50-12
Lawn/turf rear	13.6-16

Dimensions
Wheelbase	60 inches 152 cm
Length	103.1 inches 261 cm
2WD Width	46.9 inches 119 cm
4WD Width	50.2 inches 127 cm
Height	54.3 inches 137 cm
2WD Weight	1940 lbs 879 kg
4WD Weight	2040 lbs 925 kg
2WD Ground clearance	14.2 inches 36 cm
4WD Ground clearance	11.2 inches 28 cm
2WD Front tread	38.6 to 46.5 inches 98 to 118 cm
4WD Front tread	41.3 inches 104 cm
Rear tread	36 to 47.8 inches 91 to 121 cm

Photos

Mitsubishi MT250 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mitsubishi MT250 based on its 25 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mitsubishi MT250.

Estimated Continuous Field Runtime: 3.8 hrs

Approximately 3.8 hours of continuous field operation at ~75% rated power on a full tank (5 gal / 18.9 L).

Estimated 75% Load Fuel Burn~1.3 gal/hr (4.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours