New Holland L60
The New Holland L60 is a tractor produced by New Holland. It is equipped with a 178.9 ci 2.9 L engine. The listed engine power is Diesel (listed): 60 hp / 44.7 kW. Transmission: 12 forward and reverse. Operating weight: 7,209 lbs (2WD) 3270 kg.
Engine Power
Diesel (listed): 60 hp / 44.7 kW
Fuel & Capacities
29 gal
109.8 L
Transmission
12 forward and reverse
Operating Weight
7,209 lbs (2WD)
3270 kg
Overview
 | 1996 - 1999
Utility tractor |
|---|
Series map: L60L6544.7kw48.5kw
Note: the New Holland model L60 is the same as the New Holland 4635. The following data is from the 4635 listing. |
Production | |
|---|---|
Manufacturer | New Holland |
Utility tractor | |
Built in Italy | |
New Holland L60 Engine | |
|---|---|
Iveco 2.9L 3-cyl diesel | |
Fuel tank | 29 gal
109.8 L |
Engine details ...  | |
New Holland L60 Transmission | |
|---|---|
12-speed | |
Transmission details ...  |
New Holland L60 Power | |
|---|---|
Engine | 60 hp
44.7 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Steering | hydrostatic power |
Wet disc brakes | |
Two-post ROPS. Cab optional. | |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 14 gpm
53.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Weight | 7209 to 7584 pounds |
Front tire | 7.50-16 |
Rear tire | 16.9-36 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
Serie L published in 1996, by New Holland |
Engine
Series map: L60L6544.7kw48.5kw
Note: the New Holland model L60 is the same as the New Holland 4635. The following data is from the 4635 listing. |
Engine Detail — 178.9 ci / 2.9 L Diesel
Manufacturer | Iveco 8035.05 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 178.9 ci
2.9 L |
Bore/Stroke | 4.094x4.527 inches
104 x 115 mm |
Power | 60 hp
44.7 kW |
Rated RPM | 2500 |
Transmission
Series map: L60L6544.7kw48.5kw
Note: the New Holland model L60 is the same as the New Holland 4635. The following data is from the 4635 listing. |
Transmission — 12 forward and 4 reverse
Gears | 12 forward and 4 reverse |
Transmission — 12 forward and reverse
Gears | 12 forward and reverse |
Dimensions
Series map: L60L6544.7kw48.5kw
Note: the New Holland model L60 is the same as the New Holland 4635. The following data is from the 4635 listing. |
New Holland L60 Tires | |
|---|---|
Ag front | 7.50-16 (2WD) |
11.2R24 (4WD) | |
Ag rear | 16.9-36 |
Dimensions | |
|---|---|
Weight | 7,209 lbs (2WD)
3270 kg |
7,584 lbs (4WD)
3440 kg | |
Photos
New Holland L60 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for New Holland L60 based on its 60 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland L60.
Estimated Continuous Field Runtime: 9.3 hrs
Approximately 9.3 hours of continuous field operation at ~75% rated power on a full tank (29 gal / 109.8 L).
Estimated 75% Load Fuel Burn~3.1 gal/hr (11.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
New Holland L60 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for New Holland L60.
Converted Equivalents:
Horsepower (HP)60 hp
Kilowatts (kW)44.7 kW
Metric Horsepower (PS / CV)60.8 PS
Direct Competitor Comparison
Compare New Holland L60 against same-era industry alternatives in the same horsepower class.
Current Model
New Holland
New Holland L60
Engine Power:Diesel (listed): 60 hp / 44.7 kW
★ Baseline Reference
Related models
New Holland TC48DA
- Power:
- 48
- Production years:
- 2003 - 2008
New Holland TT50A
- Power:
- 48
- Production years:
- 2007 - 2008
New Holland Boomer 3050
- Power:
- 50
- Production years:
- 2008 - 2016
New Holland Boomer 50
- Power:
- 50
- Production years:
- 2017 - 2026
New Holland Boomer 50D
- Power:
- 50
- Production years:
- 2015 - 2025