CNH T2220
The CNH T2220 is a tractor produced by New Holland. It is equipped with a 101.4 ci 1.7 L engine. The listed engine power is Diesel (gross): 35 hp / 26.1 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 2620 lbs 1188 kg.
Engine Power
Diesel (gross): 35 hp / 26.1 kW
Fuel & Capacities
7.3 gal
27.6 L
Transmission
infinite forward and reverse (3-range)
Operating Weight
2620 lbs
1188 kg
Overview
 | 2008
T2200 SeriesCompact Utility tractor
T2200 Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | CNH |
Compact Utility tractor | |
CNH T2220 Engine | |
|---|---|
Shibaura 1.7L 3-cyl diesel | |
Fuel tank | 7.3 gal
27.6 L |
Engine details ...  | |
CNH T2220 Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
CNH T2220 Power | |
|---|---|
Engine (gross) | 35 hp
26.1 kW |
PTO (claimed) | 28.9 hp
21.6 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | power |
SuperSteer (optional) | |
Two-post folding ROPS. Canopy optional. | |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 7.2 gpm
27.3 lpm |
Total flow | 12.3 gpm
46.6 lpm |
Steering flow | 5.1 gpm
19.3 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Rear lift (at 24"/610mm) | 1635 lbs
741 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | live |
Rear PTO Type | 540 (1.375) |
Mid PTO Type | 2000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 63 inches
160 cm |
Weight | 2620 lbs
1188 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 101.4 ci / 1.7 L Diesel
Manufacturer | Shibaura N843L |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 101.4 ci
1.7 L |
Bore/Stroke | 3.307x3.937 inches
84 x 100 mm |
Power (gross) | 35 hp
26.1 kW |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — infinite forward and reverse (3-range) hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse (3-range) |
Dimensions
CNH T2220 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 63 inches
160 cm |
Length | 112.4 inches
285 cm |
Width | 61.6 inches
156 cm |
Height (ROPS) | 94.9 inches
241 cm |
Height (Folded ROPS) | 66.6 inches
169 cm |
Shipping weight | 2620 lbs
1188 kg |
Clearance (front axle) | 13 inches
33 cm |
Photos
CNH T2220 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for New Holland CNH T2220 based on its 35 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland CNH T2220.
Estimated Continuous Field Runtime: 4 hrs
Approximately 4 hours of continuous field operation at ~75% rated power on a full tank (7.3 gal / 27.6 L).
Estimated 75% Load Fuel Burn~1.8 gal/hr (6.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
New Holland CNH T2220 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for New Holland CNH T2220.
Converted Equivalents:
Horsepower (HP)35 hp
Kilowatts (kW)26.1 kW
Metric Horsepower (PS / CV)35.5 PS
Direct Competitor Comparison
Compare CNH T2220 against same-era industry alternatives in the same horsepower class.
Current Model
New Holland
CNH T2220
Engine Power:Diesel (gross): 35 hp / 26.1 kW
★ Baseline Reference
Related models
New Holland Boomer 1030
- Power:
- 28
- Production years:
- 2008 - 2008
New Holland Boomer 30
- Power:
- 28
- Production years:
- 2011 - 2013
New Holland T1110
- Power:
- 28
- Production years:
- 2008 - 2008
New Holland 1725
- Power:
- 29
- Production years:
- 1997 - 1999
New Holland TC29
- Power:
- 29
- Production years:
- 1999 - 2003