New Holland T7.230

The New Holland T7.230 is a tractor produced by New Holland. It is equipped with a 411 ci 6.7 L engine. The listed engine power is Diesel (gross): 180 hp / 134.2 kW. Transmission: Auto Command. Operating weight: 15322 to 16094 pounds.

Engine Power

Diesel (gross): 180 hp / 134.2 kW

Fuel & Capacities

104 gal 393.6 L

Transmission

Auto Command

Operating Weight

15322 to 16094 pounds

Overview

	2014 - T7 SeriesRow-Crop tractor
2014 -
T7 Series
Row-Crop tractor

Production
Manufacturer	New Holland (a part of CNH)
Row-Crop tractor
Original price	$177,210 (2017 18-speed )
	$203,860 (2017 CVT )

New Holland T7.230 Engine
FPT 6.7L 6-cyl diesel
Fuel tank	104 gal 393.6 L
Exhaust fluid (DEF)	13 gal 49.2 L
Engine details ...

New Holland T7.230 Power
Engine (gross)	180 hp 134.2 kW
Engine (max)	225 hp 167.8 kW
PTO (claimed)	150 hp 111.9 kW
Drawbar (tested)	117.2 hp 87.4 kW
PTO (tested)	173.5 hp 129.4 kW
Performance test details ...

Mechanical
Four-wheel drive
Final drives	inboard planetary
Power steering
Wet disc brakes
Cab standard with air-conditioning. Optional Comfort Ride cab suspension.

Hydraulics
Type	closed center load-sensing
Rear valves	4 or 5
Mid valves	3 OptOptional
Pump flow	32 gpm*Standard flow with power shift. 121.1 lpm
	39.5 gpm*Standard flow with CVT transmission, optional with power shift. 149.5 lpm
	45 gpm*Optional flow with CVT transmission. 170.3 lpm

Tractor hitch
Rear Type	III/II
Control	electronic lower-link draft control
Rear lift (at ends)	12787 lbs 5800 kg
	15873 lbsOptOptional 7199 kg
Rear lift (at 24"/610mm)	9450 lbs 4286 kg
	10746 lbsOptOptional 4874 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
Engine RPM	540@1893
	540E@1569
	1000@1950
	1000E@1583
Front PTO	independent OptOptional
Front PTO Type	1000

Dimensions & Tires
Standard Wheelbase	113.5 inches 288 cm
Suspension Wheelbase	113.5 inches 288 cm
SuperSteer Wheelbase	117.2 inches 297 cm
Weight	15322 to 16094 pounds
Front tire	380/85R34
Rear tire	480/80R46
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	150
	200 OptOptional
Battery volts	12

Engine

Engine Detail — 411 ci / 6.7 L Diesel

Manufacturer	FPT
Configuration	turbocharged diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	411 ci 6.7 L
Bore/Stroke	4.095x5.20 inches 104 x 132 mm
Emissions	Tier IV
Emission control	selective catalytic reduction
Rated Power (gross)	180 hp 134.2 kW
Maximum Power (gross)	225 hp 167.8 kW
Fuel system	electronic high-pressure common rail direct injection
Cooling system	viscous fan
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission options
18-speed full power shift
19-speed full power shift
continuously-variable transmission (CVT)

Transmission — Power Command

Transmission	Power Command
Type	full power shift
Gears	18 forward and 6 reverse

Transmission — Power Command

Transmission	Power Command
Type	full power shift
Gears	19 forward and 6 reverse

Transmission — Auto Command

Transmission	Auto Command
Type	continuously-variable transmission (CVT)
Gears	infinite forward and reverse

Dimensions

New Holland T7.230 Tires
Standard tires (ag)	Front: 380/85R34. Rear: 480/80R46

Dimensions
Standard Wheelbase	113.5 inches 288 cm
Suspension Wheelbase	113.5 inches 288 cm
SuperSteer Wheelbase	117.2 inches 297 cm
Length	227.3 inches 577 cm
Width	97.2 inches*Minimum width 246 cm
Height (cab)	122.6 inches 311 cm
Front axle	4WD
Front axle	Suspended 4WD
Front axle	SuperSteer 4WD
Flange rear axle
Bar rear axle	3.62 inch diameter 91 mm

New Holland T7.230 Weight
Standard Shipping	15322 lbs 6950 kg
Suspension Shipping	16094 lbs 7300 kg
SuperSteer Shipping	15653 lbs 7100 kg
Max capacity	28660 lbs 13000 kg

Tests

OCED Tractor Test 2961
Diesel CVT 4WD June 2015 - April 2016, Link: OCED Tractor Test 2961 file
PTO performance
Max power	173.5 hp 129.4 kW
Fuel use	9.5 gal/hour 36.0 l/hour
Power at rated engine speed	143.5 hp 107.0 kW
Fuel use	8.9 gal/hour 33.7 l/hour
Power at rated PTO speed	171.7 hp 128.0 kW
Fuel use	9.7 gal/hour 36.7 l/hour
Drawbar performance
Max power	117.2 hp 87.4 kW
Fuel use	8.3 gal/hour 31.4 l/hour
Pull at 10 KPH
Max pull	16605 lbs 7532 kg
Pull at 5.5 KPH

Photos

New Holland T7.230 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland T7.230 based on its 180 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland T7.230.

Estimated Continuous Field Runtime: 11.1 hrs

Approximately 11.1 hours of continuous field operation at ~75% rated power on a full tank (104 gal / 393.7 L).

Estimated 75% Load Fuel Burn~9.4 gal/hr (35.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours