New Holland T7.190

The New Holland T7.190 is a tractor produced by New Holland. It is equipped with a 411 ci 6.7 L engine. The listed engine power is Diesel (gross): 150 hp / 111.9 kW. Transmission: Auto Command. Operating weight: 12787 to 13448 pounds.

Engine Power

Diesel (gross): 150 hp / 111.9 kW

Fuel & Capacities

87 gal 329.3 L

Transmission

Auto Command

Operating Weight

12787 to 13448 pounds

Overview

	2014 - T7 SeriesRow-Crop tractor
2014 -
T7 Series
Row-Crop tractor

Production
Manufacturer	New Holland (a part of CNH)
Row-Crop tractor
Original price	$147,440 (2017 18-speed )
	$167,412 (2017 CVT )

New Holland T7.190 Engine
FPT 6.7L 6-cyl diesel
Fuel tank	87 gal 329.3 L
Exhaust fluid (DEF)	13 gal 49.2 L
Engine details ...

New Holland T7.190 Power
Engine (gross)	150 hp 111.9 kW
Engine (max)	190 hp 141.7 kW
PTO (claimed)	125 hp 93.2 kW
Drawbar (tested)	101.1 hp 75.4 kW
PTO (tested)	141.6 hp 105.6 kW
Performance test details ...

Mechanical
Four-wheel drive
Final drives	inboard planetary
Power steering
Wet disc brakes
Cab standard with air-conditioning. Optional Comfort Ride cab suspension.

Hydraulics
Type	closed center load-sensing
Rear valves	4 or 5
Mid valves	3 OptOptional
Pump flow	29.8 gpm*Standard flow with power shift. 112.8 lpm
	37 gpm*Standard flow with CVT transmission. 140.0 lpm
	42 gpm*Optional flow with CVT transmission. 159.0 lpm

Tractor hitch
Rear Type	III/II
Control	electronic lower-link draft control
Rear lift (at ends)	12185 lbs 5527 kg
Rear lift (at 24"/610mm)	8050 lbs 3651 kg
	9250 lbsOptOptional 4195 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
Engine RPM	540@1969
	1000@1924
Front PTO	independent OptOptional
Front PTO Type	1000

Dimensions & Tires
Standard Wheelbase	107.6 inches 273 cm
Suspension Wheelbase	109.8 inches 278 cm
SuperSteer Wheelbase	113.3 inches 287 cm
Weight	12787 to 13448 pounds
Front tire	380/85R28
Rear tire	460/85R38
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	150
	200 OptOptional
Battery volts	12

Engine

Engine Detail — 411 ci / 6.7 L Diesel

Manufacturer	FPT
Configuration	turbocharged diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	411 ci 6.7 L
Bore/Stroke	4.095x5.20 inches 104 x 132 mm
Emissions	Tier IV
Emission control	selective catalytic reduction
Rated Power (gross)	150 hp 111.9 kW
Maximum Power (gross)	190 hp 141.7 kW
Fuel system	electronic high-pressure common rail direct injection
Cooling system	viscous fan
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission options
18-speed full power shift
19-speed full power shift
continuously-variable transmission (CVT)

Transmission — Power Command

Transmission	Power Command
Type	full power shift
Gears	18 forward and 6 reverse

Transmission — Power Command

Transmission	Power Command
Type	full power shift
Gears	19 forward and 6 reverse

Transmission — Auto Command

Transmission	Auto Command
Type	continuously-variable transmission (CVT)
Gears	infinite forward and reverse

Dimensions

New Holland T7.190 Tires
Standard tires (ag)	Front: 380/85R28. Rear: 460/85R38

Dimensions
Standard Wheelbase	107.6 inches 273 cm
Suspension Wheelbase	109.8 inches 278 cm
SuperSteer Wheelbase	113.3 inches 287 cm
Length	211 inches 535 cm
Width	95.8 inches*Minimum width 243 cm
Height (cab)	118.5 inches 300 cm
Front axle	4WD
Front axle	Suspended 4WD
Front axle	SuperSteer 4WD
Flange rear axle
Bar rear axle	3.62 inch diameter 91 mm

New Holland T7.190 Weight
Standard Shipping	12787 lbs 5800 kg
Suspension Shipping	13448 lbs 6100 kg
SuperSteer Shipping	13404 lbs 6080 kg
Max capacity	24251 lbs 11000 kg

Tests

OCED Tractor Test 2966
Diesel CVT 4WD June 2015 - October 2016, Link: OCED Tractor Test 2966 file
PTO performance
Max power	141.6 hp 105.6 kW
Fuel use	7.8 gal/hour 29.5 l/hour
Power at rated engine speed	118.9 hp 88.7 kW
Fuel use	7.5 gal/hour 28.4 l/hour
Power at rated PTO speed	137.6 hp 102.6 kW
Fuel use	7.8 gal/hour 29.5 l/hour
Drawbar performance
Max power	101.1 hp 75.4 kW
Fuel use	7.8 gal/hour 29.5 l/hour
Pull at 10 KPH
Max pull	14225 lbs 6452 kg
Pull at 6.5 KPH

Photos

New Holland T7.190 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland T7.190 based on its 150 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland T7.190.

Estimated Continuous Field Runtime: 11.2 hrs

Approximately 11.2 hours of continuous field operation at ~75% rated power on a full tank (87 gal / 329.3 L).

Estimated 75% Load Fuel Burn~7.8 gal/hr (29.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours