New Holland TC24D
The New Holland TC24D is a tractor produced by New Holland. The listed engine power is Diesel (gross): 24 hp / 17.9 kW. Transmission: infinite forward and reverse (2-range). Operating weight: 1,723 lbs 781 kg.
Engine Power
Diesel (gross): 24 hp / 17.9 kW
Fuel & Capacities
5.3 gal
20.1 L
Transmission
infinite forward and reverse (2-range)
Operating Weight
1,723 lbs
781 kg
Overview
![]() | 1999 - 2003
Boomer TC SeriesCompact Utility tractor
Boomer TC Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | New Holland |
Compact Utility tractor | |
New Holland TC24D Engine | |
|---|---|
Shibaura 3-cyl diesel | |
Fuel tank | 5.3 gal
20.1 L |
Engine details ... | |
New Holland TC24D Power | |
|---|---|
Engine (gross) | 24 hp
17.9 kW |
Gear PTO (claimed) | 19.5 hp
14.5 kW |
Hydro PTO (claimed) | 18.5 hp
13.8 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Two-post ROPS. |
Hydraulics | |
|---|---|
Pump flow | 4.9 gpm
18.5 lpm |
Steering flow | 7.65 gpm
29.0 lpm |
Power Take-off (PTO) | |
|---|---|
Gear Rear PTO | transmission |
Hydro Rear PTO | live |
Rear PTO Type | 540 |
Mid PTO | optional |
Mid PTO Type | 2000 |
Dimensions & Tires | |
|---|---|
Weight | 1,723 lbs
781 kg |
Front tire | 5x12 |
Rear tire | 8x16 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
BOOMER Compact Tractors published in 2003, by New Holland |
Engine
Engine Detail — Diesel
Manufacturer | Shibaura |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Power (gross) | 24 hp
17.9 kW |
Rated RPM | 2600 |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
9-speed gear | |
hydrostatic |
Transmission — 9 forward and 3 reverse gear
Type | gear |
Gears | 9 forward and 3 reverse |
Transmission — infinite forward and reverse (2-range) hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse (2-range) |
Dimensions
New Holland TC24D Tires | |
|---|---|
Ag front | 5x12 |
6x12 | |
Ag rear | 8x16 |
9.5x16 | |
Lawn/turf front | 22x9.00-12 |
Lawn/turf rear | 31x13.5-15 |
Industrial front | 23x8.50-12 |
Industrial rear | 12x6.5 |
Dimensions | |
|---|---|
Length | 106.3 inches
270 cm |
Width | 44.7 inches
113 cm |
Height (ROPS) | 81.2 inches
206 cm |
Shipping weight | 1,723 lbs
781 kg |
Ground clearance | 10.7 inches
27 cm |
Front tread | 33.3 to 33.6 inches
84 to 85 cm |
Rear tread | 35.2 inches
89 cm |
Attachments
Attachment overview | |
|---|---|
54" mid-mount mower deck | |
60" mid-mount mower deck | |
Snowblower | |
Blade | |
Front-end loader |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for New Holland TC24D based on its 24 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TC24D.
Estimated Continuous Field Runtime: 4.2 hrs
Approximately 4.2 hours of continuous field operation at ~75% rated power on a full tank (5.3 gal / 20.1 L).
Estimated 75% Load Fuel Burn~1.2 gal/hr (4.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
New Holland TC24D Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for New Holland TC24D.
Converted Equivalents:
Horsepower (HP)24 hp
Kilowatts (kW)17.9 kW
Metric Horsepower (PS / CV)24.3 PS
Direct Competitor Comparison
Compare New Holland TC24D against same-era industry alternatives in the same horsepower class.
Current Model
New Holland
New Holland TC24D
Engine Power:Diesel (gross): 24 hp / 17.9 kW
★ Baseline Reference
Related models
New Holland 1320
- Power:
- 20
- Production years:
- 1996 - 1998
New Holland Boomer 1020
- Power:
- 20
- Production years:
- 2008 - 2011
New Holland T1010
- Power:
- 20
- Production years:
- 2008 - 2008
New Holland TC21
- Power:
- 21
- Production years:
- 1999 - 2003
New Holland TC21DA
- Power:
- 21
- Production years:
- 2003 - 2005


