New Holland row-crop TM155
The New Holland row-crop TM155 is a tractor produced by New Holland. It is equipped with a 456 ci 7.5 L engine. The listed engine power is Diesel (listed): 155 hp / 115.6 kW. Transmission: Range Command. Drive type: 4x2 2WD. Operating weight: 11863 to 12920 pounds.
Engine Power
Diesel (listed): 155 hp / 115.6 kW
Drive & Traction
4x2 2WD
Fuel & Capacities
75.3 gal
285.0 L
Transmission
Range Command
Operating Weight
11863 to 12920 pounds
Overview
 | 2002 - 2007
TM Series |
|---|
Production | |
|---|---|
Manufacturer | New Holland |
Built in Basildon, England | |
New Holland TM155 Engine | |
|---|---|
New Holland 7.5L 6-cyl diesel | |
Engine details ...  |
New Holland TM155 Power | |
|---|---|
Engine | 155 hp
115.6 kW |
PTO (claimed) | 125 hp
93.2 kW |
Drawbar (tested) | 108.5 hp
80.9 kW |
PTO (tested) | 133.8 hp
99.8 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Drive | 4x2 2WD |
4x4 MFWD 4WD optional | |
Steering | hydrostatic power |
Differential hydraulic wet disc brakes | |
Cab standard with heat and air-conditioning. Optional heated air-ride seat. | |
Capacity | |
|---|---|
Fuel | 75.3 gal
285.0 L |
Hydraulic system | 5.95 gal
22.5 L |
Hydraulics | |
|---|---|
Type | closed center load sensing (CCLS) |
Capacity | 5.95 gal
22.5 L |
Pressure | 2750 psi
189.6 bar |
Rear valves | 4 |
Mid valves | 2 to 4 |
Pump flow | 28 gpm
106.0 lpm |
Total flow | 44 gpm
166.5 lpm |
Steering flow | 16 gpm
60.6 lpm |
Tractor hitch | |
|---|---|
Rear Type | 2/3N |
Control | electronic lower-link draft control |
Rear lift (at 24"/610mm) | 11,420 lbs
5180 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic wet disc |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 107.2 inches
272 cm |
Weight | 11863 to 12920 pounds |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 120 |
Battery CCA | 1300 |
Battery volts | 12 |
Engine
Engine Detail — 456 ci / 7.5 L Diesel
Manufacturer | New Holland |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 456 ci
7.5 L |
Bore/Stroke | 4.40x5.00 inches
112 x 127 mm |
Power | 155 hp
115.6 kW |
Air cleaner | dual paper elements with aspirator |
Compression | 17.0:1 |
Rated RPM | 2200 |
Torque RPM | 1400 |
Starter volts | 12 |
Oil capacity | 20 qts
18.9 L |
Coolant capacity | 26.8 qts
25.4 L |
Transmission
Transmission options | |
|---|---|
17-speed full power shift | |
18-speed full power shift | |
17-speed partial power shift | |
18-speed partial power shift |
Transmission — Power Command
Transmission | Power Command |
Type | full power shift |
Gears | 17 forward and 6 reverse |
Transmission — Power Command
Transmission | Power Command |
Type | full power shift |
Gears | 18 forward and 6 reverse |
Transmission — Range Command
Transmission | Range Command |
Type | partial power shift |
Gears | 17 forward and 6 reverse |
Transmission — Range Command
Transmission | Range Command |
Type | partial power shift |
Gears | 18 forward and 6 reverse |
Dimensions
New Holland TM155 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 107.2 inches
272 cm |
Length | 185.7 inches
471 cm |
Height | 111.4 inches
282 cm |
Ground clearance | 16 inches
40 cm |
Front axle | 2WD |
Front axle | 4WD |
Front axle | SuperSteer 4WD |
Front axle | TerraGlide suspension |
Flange rear axle | |
Bar rear axle | 98 inch length
2489 mm |
Bar rear axle | 112 inch length
2844 mm |
2WD Front tread | 60.9 to 88.9 inches
154 to 225 cm |
4WD Front tread | 61.1 to 89.3 inches
155 to 226 cm |
Flange Rear tread | 60 to 87.9 inches
152 to 223 cm |
Rear tread | 60 to 96 inches
152 to 243 cm |
Rear tread | 60 to 100 inches
152 to 254 cm |
New Holland TM155 Weight | |
|---|---|
Shipping | 11,863 lbs (2WD)
5381 kg |
12,439 lbs (4WD)
5642 kg | |
Operating | 12,920 lbs
5860 kg |
Tests
OCED Tractor Test 2120 | |
|---|---|
Diesel 18-speed 4WD
October 1, 2003 - February 1, 2004
Link: OCED Tractor Test 2120 file | |
PTO performance | |
Max power | 133.8 hp
99.8 kW |
Fuel use | 8.2 gal/hour
31.0 l/hour |
Power at rated engine speed | 131.6 hp
98.1 kW |
Fuel use | 8.4 gal/hour
31.8 l/hour |
Power at rated PTO speed | 133.6 hp
99.6 kW |
Fuel use | 8.2 gal/hour
31.0 l/hour |
Drawbar performance | |
Max power | 108.5 hp
80.9 kW |
Fuel use | 8.4 gal/hour
31.8 l/hour |
Gear 8 used for power test. | |
Max pull | 13,915 lbs
6311 kg |
Gear 1 used for pull test. | |
Photos
New Holland row-crop TM155
Recommended Implements & Sizing Guide
Engineering recommendations for New Holland row-crop TM155 based on its 155 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland row-crop TM155.
Estimated Continuous Field Runtime: 9.3 hrs
Approximately 9.3 hours of continuous field operation at ~75% rated power on a full tank (75.3 gal / 285 L).
Estimated 75% Load Fuel Burn~8.1 gal/hr (30.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
New Holland row-crop TM155 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for New Holland row-crop TM155.
Converted Equivalents:
Horsepower (HP)155 hp
Kilowatts (kW)115.6 kW
Metric Horsepower (PS / CV)157.1 PS
Direct Competitor Comparison
Compare New Holland row-crop TM155 against same-era industry alternatives in the same horsepower class.
Current Model
New Holland
New Holland row-crop TM155
Engine Power:Diesel (listed): 155 hp / 115.6 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 1066
Engine Power:140
Production Years:1971 - 1976
Related models
New Holland TS6.125
- Power:
- 124
- Production years:
- 2012 - 2022
New Holland T6.165
- Power:
- 125
- Production years:
- 2012 - 2025
New Holland T6050 Delta
- Power:
- 125
- Production years:
- 2007 - 2012
New Holland T6050 Elite
- Power:
- 125
- Production years:
- 2007 - 2012
New Holland T6050 Plus
- Power:
- 125
- Production years:
- 2007 - 2012