New Holland TS100A
The New Holland TS100A is a tractor produced by New Holland. It is equipped with a 273.7 ci 4.5 L engine. The listed engine power is Engine Detail — 273.7 ci / 4.5 L (listed): 101 hp / 75.3 kW. Transmission: Electro Command. Operating weight: 10053 lbs 4560 kg.
Engine Power
Engine Detail — 273.7 ci / 4.5 L (listed): 101 hp / 75.3 kW
Fuel & Capacities
47.6 gal
180.2 L
Transmission
Electro Command
Operating Weight
10053 lbs
4560 kg
Overview
 | 2003 - 2005
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | New Holland |
Utility tractor | |
Variants | |
|---|---|
TS100A Delta | economy model |
TS100A Plus | premium model |
New Holland TS100A Engine | |
|---|---|
New Holland 4.5L 4-cyl | |
Fuel tank | 47.6 gal
180.2 L |
SuperSteer Fuel tank | 41.2 gal
155.9 L |
Engine details ...  | |
New Holland TS100A Power | |
|---|---|
Engine | 101 hp
75.3 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Horizon Cab standard with air-conditioning. |
Hydraulics | |
|---|---|
Type | open center |
closed-center load sensing OptOptional | |
Pressure | 3046 psi
210.0 bar |
Rear valves | 4 |
Mid valves | 2 |
Pump flow | 21.1 gpm
79.9 lpm |
29.9 gpm*Closed center
113.2 lpm | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 95 inches
241 cm |
Terraglide Wheelbase | 95.3 inches
242 cm |
SuperSteer Wheelbase | 99.2 inches
251 cm |
Weight | 10053 lbs
4560 kg |
Front tire | 13.6R28 |
Rear tire | 16.9R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
Engine
Engine Detail — 273.7 ci / 4.5 L
Manufacturer | New Holland |
Configuration | turbocharged intercooled, 4-cylinder 8-valve, liquid-cooled |
Displacement | 273.7 ci
4.5 L |
Bore/Stroke | 4.09x5.20 inches
104 x 132 mm |
Power | 101 hp
75.3 kW |
Fuel system | mechanical fuel injection |
Rated RPM | 2200 |
Torque | 320.8 lb-ft
435.0 Nm |
Torque RPM | 1400 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
24-speed two-speed power shift | |
16-speed partial power shift |
Transmission — Dual Command
Transmission | Dual Command |
Type | two-speed power shift |
Gears | 24 forward and reverse |
Transmission — Electro Command
Transmission | Electro Command |
Type | partial power shift |
Gears | 16 forward and reverse |
Dimensions
New Holland TS100A Tires | |
|---|---|
Standard tires (ag) | Front: 13.6R28. Rear: 16.9R38 |
Dimensions | |
|---|---|
Wheelbase | 95 inches
241 cm |
Terraglide Wheelbase | 95.3 inches
242 cm |
SuperSteer Wheelbase | 99.2 inches
251 cm |
Length | 169 inches
429 cm |
Width | 73.7 inches
187 cm |
Height | 113.2 inches
287 cm |
Shipping weight | 10053 lbs
4560 kg |
Max weight | 17857 lbs
8099 kg |
Photos
New Holland TS100A tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for New Holland TS100A based on its 101 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TS100A.
Estimated Continuous Field Runtime: 9.1 hrs
Approximately 9.1 hours of continuous field operation at ~75% rated power on a full tank (47.6 gal / 180.2 L).
Estimated 75% Load Fuel Burn~5.3 gal/hr (19.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
New Holland TS100A Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for New Holland TS100A.
Converted Equivalents:
Horsepower (HP)101 hp
Kilowatts (kW)75.3 kW
Metric Horsepower (PS / CV)102.4 PS
Direct Competitor Comparison
Compare New Holland TS100A against same-era industry alternatives in the same horsepower class.
Current Model
New Holland
New Holland TS100A
Engine Power:Engine Detail — 273.7 ci / 4.5 L (listed): 101 hp / 75.3 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 966
Engine Power:91
Production Years:1971 - 1976
Related models
New Holland TK4040
- Power:
- 81.2
- Production years:
- 2009 - 2017
New Holland TD5030
- Power:
- 82
- Production years:
- 2009 - 2019
New Holland TL80A
- Power:
- 82
- Production years:
- 2004 - 2008
New Holland T4.85
- Power:
- 84
- Production years:
- 2013 - 2014
New Holland T4040
- Power:
- 84
- Production years:
- 2008 - 2011