New Holland TK4040

The New Holland TK4040 is a tractor produced by New Holland. It is equipped with a 195 ci 3.2 L engine. The listed engine power is Diesel (gross): 81.2 hp / 60.6 kW. Transmission: 16 forward and 8 reverse. Drive type: crawler. Operating weight: 8796 to 9524 pounds.

Engine Power

Diesel (gross): 81.2 hp / 60.6 kW

Drive & Traction

crawler

Fuel & Capacities

29.3 gal 110.9 L

Transmission

16 forward and 8 reverse

Operating Weight

8796 to 9524 pounds

Overview

	2009 - 2017 TK4000 SeriesAgricultural Crawler tractor TK4000 Series Agricultural Crawler tractor

Production
Manufacturer	New Holland
Agricultural Crawler tractor
Built in Jesi, Italy

Variants
TK4040	standard chassis
TK4040M	wide chassis

New Holland TK4040 Engine
FPT 3.2L 4-cyl diesel
Fuel tank	29.3 gal 110.9 L
Engine details ...

New Holland TK4040 Power
Engine (gross)	81.2 hp 60.6 kW

Mechanical
Drive	crawler
Two-post mid-mount folding ROPS. Cab available.

Hydraulics
Type	open center
Pump flow	10.9 gpm 41.3 lpm

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E

Dimensions & Tracks
Weight	8796 to 9524 pounds
13.8-inch tracks
Full dimensions and tracks ...

Electrical
Charging system	alternator
Battery volts	12

References

New Holland TK4000 published in 2008
New Holland TK4000 published in 2010

Engine

Engine Detail — 195 ci / 3.2 L Diesel

Manufacturer	FPT F5C
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	195 ci 3.2 L
Bore/Stroke	3.898x4.094 inches 99 x 104 mm
Emissions	Tier III
Rated Power (gross)	81.2 hp 60.6 kW
Rated RPM	2300
Torque	259.6 lb-ft 352.0 Nm
Torque RPM	1300
Starter	electric
Starter volts	12

Transmission

Transmission options
8-speed
16-speed creeper

Transmission — 8 forward and reverse

Gears	8 forward and reverse
Transmission
Type	creeper
Gears	16 forward and 8 reverse

Dimensions

New Holland TK4040 Tracks
Width	13.8 inches 35 cm
TK4040 width	12.2 inches 30 cm
TK4040M width	15.75 inches 40 cm

Dimensions
Length	128 inches 325 cm
Width	55.5 inches 140 cm
TK4040M Width	66.9 inches 169 cm
Gauge	43.3 inches 109 cm
TK4040M Gauge	51.2 inches 130 cm

New Holland TK4040 Weight
TK4040 ROPS	8796 lbs 3989 kg
TK4040M ROPS	9083 lbs 4120 kg
TK4040 Cab	9237 lbs 4189 kg
TK4040M Cab	9524 lbs 4320 kg

New Holland TK4040 Height
Steering wheel	40.9 inches 103 cm
ROPS	92.5 inches 234 cm
Cab	76.5 inches 194 cm

Photos

New Holland TK4040 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland TK4040 based on its 81.2 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TK4040.

Estimated Continuous Field Runtime: 6.9 hrs

Approximately 6.9 hours of continuous field operation at ~75% rated power on a full tank (29.3 gal / 110.9 L).

Estimated 75% Load Fuel Burn~4.2 gal/hr (16 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours