New Holland TS6.140

The New Holland TS6.140 is a tractor produced by New Holland. It is equipped with a 410.6 ci 6.7 L engine. The listed engine power is Diesel (gross): 139 hp / 103.7 kW. Transmission: DualPower. Operating weight: 7524 to 8847 pounds.

Engine Power

Diesel (gross): 139 hp / 103.7 kW

Fuel & Capacities

62 gal 234.7 L

Transmission

DualPower

Operating Weight

7524 to 8847 pounds

Overview

	2012 - TS6 SeriesRow-Crop tractor
2012 -
TS6 Series
Row-Crop tractor

Production
Manufacturer	New Holland
Row-Crop tractor
Original price	$59,341 (2014 Mech Shuttle ROPS 2WD )
	$78,837 (2014 DualPower Cab 4WD )

New Holland TS6.140 Engine
FPT 6.7L 6-cyl diesel
Fuel tank	62 gal 234.7 L
Engine details ...

New Holland TS6.140 Power
Engine (gross)	139 hp 103.7 kW
PTO (claimed)	115 hp 85.8 kW

Mechanical
Two- or four-wheel drive
Two-post foldable ROPS. Cab optional with air-conditioning.

Hydraulics
Rear valves	2 to 4
Pump flow	13 gpm 49.2 lpm
	22 gpm (optional) 83.3 lpm
Steering flow	9 gpm 34.1 lpm

Tractor hitch
Rear Type	II
Control	top link draft sensing
Rear lift (at 24"/610mm)	3600 lbs 1632 kg
	5400 lbs (optional) 2449 kg
	7200 lbs (optional) 3265 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	wet disc
Rear PTO Type	540/1000

Dimensions & Tires
Weight	7524 to 8847 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	120
Battery CCA	950
Battery volts	12

Engine

Engine Detail — 410.6 ci / 6.7 L Diesel

Manufacturer	FPT
Configuration	turbocharged intercooled diesel, 6-cylinder, liquid-cooled
Displacement	410.6 ci 6.7 L
Bore/Stroke	4.094x5.197 inches 104 x 132 mm
Emissions	Tier III
Power (gross)	139 hp 103.7 kW
Starter	electric
Starter volts	12

Transmission

Transmission options
8-speed mechanical shuttle
8-speed power shuttle
16-speed

Transmission — 8 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	8 forward and reverse
Clutch	dry disc

Transmission — 8 forward and reverse power shuttle

Type	power shuttle
Gears	8 forward and reverse
Clutch	wet disc

Transmission — DualPower

Transmission	DualPower
Gears	16 forward and 8 reverse

Dimensions

New Holland TS6.140 Tires

Dimensions
Flange rear axle
Bar rear axle
Front tread	56 to 80 inches 142 to 203 cm (2WD)
Front tread	64 to 80 inches 162 to 203 cm (4WD)
Rear tread	64 to 80 inches 162 to 203 cm (flange)
Rear tread	62 to 92 inches 157 to 233 cm (bar)

New Holland TS6.140 Weight
Shipping	7524 lbs (2WD ROPS) 3412 kg
	7910 lbs (2WD Cab) 3587 kg
	8109 lbs (4WD ROPS) 3678 kg
	8847 lbs (4WD Cab) 4012 kg

New Holland TS6.140 Height
ROPS	116 inches 294 cm
Cab	111 inches 281 cm
Exhaust	116 inches 294 cm

Photos

New Holland TS6.140 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland TS6.140 based on its 139 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TS6.140.

Estimated Continuous Field Runtime: 8.6 hrs

Approximately 8.6 hours of continuous field operation at ~75% rated power on a full tank (62 gal / 234.7 L).

Estimated 75% Load Fuel Burn~7.2 gal/hr (27.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours