New Holland Workmaster 105

The New Holland Workmaster 105 is a tractor produced by New Holland. It is equipped with a 207 ci 3.4 L engine. The listed engine power is Diesel (gross): 112 hp / 83.5 kW. Transmission: 12 forward and reverse. Operating weight: 7738 to 8637 pounds.

Engine Power

Diesel (gross): 112 hp / 83.5 kW

Fuel & Capacities

24 gal 90.8 L

Transmission

12 forward and reverse

Operating Weight

7738 to 8637 pounds

Overview

	2019 - Workmaster SeriesUtility tractor
2019 -
Workmaster Series
Utility tractor

Production
Manufacturer	New Holland
Utility tractor
Original price	$70,634 (2022 ROPS )
	$87,100 (2022 Cab )

New Holland Workmaster 105 Engine
FPT 3.4L 4-cyl diesel
ROPS Fuel tank	24 gal 90.8 L
Cab Fuel tank	29 gal 109.8 L
Exhaust fluid (DEF)	2.9 gal 11.0 L
Engine details ...

New Holland Workmaster 105 Transmission
12-speed power shuttle
Transmission details ...

New Holland Workmaster 105 Power
Engine (gross)	112 hp 83.5 kW
PTO (claimed)	92 hp 68.6 kW

Mechanical
Four-wheel drive
Final drives	inboard planetary
Power steering
Wet disc brakes
Two-post folding ROPS. Cab optional with air-conditioning.

Hydraulics
Type	open center
Rear valves	2 or 3
Pump flow	16.9 gpm 64.0 lpm
	21.6 gpmOptOptional 81.8 lpm
Steering flow	9.7 gpm 36.7 lpm

Tractor hitch
Rear Type	II/I
Rear lift (at 24"/610mm)	3200 lbs 1451 kg
	6200 lbsOptOptional 2812 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic wet disc
Rear PTO Type	540
	540/540E l 540/1000 ) ((Optional)OptOptional

Dimensions & Tires
ROPS Wheelbase	83.7 inches 212 cm
Cab Wheelbase	88.9 inches 225 cm
Weight	7738 to 8637 pounds
Front tire	12.4-24
Rear tire	18.4-30
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	120
Battery volts	12

Engine

Engine Detail — 207 ci / 3.4 L Diesel

Manufacturer	FPT F5
Configuration	turbocharged aftercooled diesel, 4-cylinder, liquid-cooled
Displacement	207 ci 3.4 L
Bore/Stroke	3.90x4.33 inches 99 x 110 mm
Emissions	Tier 4
Power (gross)	112 hp 83.5 kW
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission — 12 forward and reverse power shuttle

Type	power shuttle
Gears	12 forward and reverse
Four synchronized gears in three ranges with power shuttle.

Dimensions

New Holland Workmaster 105 Tires
Standard tires (ag)	Front: 12.4-24. Rear: 18.4-30
Optional tires (ag)	Front: 13.6-24. Rear: 16.9-34

Dimensions
ROPS Wheelbase	83.7 inches 212 cm
Cab Wheelbase	88.9 inches 225 cm
Length	161.1 inches 409 cm
Height (ROPS)	103 inches 261 cm
Height (cab)	105.4 inches 267 cm
ROPS Weight	7738 lbs 3509 kg
Cab Weight	8637 lbs 3917 kg
Flange rear axle

Attachments

Attachment overview
New Holland 632TL loader
New Holland 637TL loader

Photos

New Holland Workmaster 105 uility tractor.

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland Workmaster 105 based on its 112 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland Workmaster 105.

Estimated Continuous Field Runtime: 4.1 hrs

Approximately 4.1 hours of continuous field operation at ~75% rated power on a full tank (24 gal / 90.8 L).

Estimated 75% Load Fuel Burn~5.8 gal/hr (22 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours