New Holland Workmaster 35

The New Holland Workmaster 35 is a tractor produced by New Holland. It is equipped with a 114.7 ci 1.9 L engine. The listed engine power is Diesel (listed): 35 hp / 26.1 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 722 lbs 327 kg.

Engine Power

Diesel (listed): 35 hp / 26.1 kW

Fuel & Capacities

7.4 gal 28.0 L

Transmission

infinite forward and reverse (3-range)

Operating Weight

722 lbs 327 kg

Overview

	2017 - Workmaster SeriesCompact Utility tractor
2017 -
Workmaster Series
Compact Utility tractor

Production
Manufacturer	New Holland (a part of CNH)
Compact Utility tractor
Original price	$18,938 (2017 shuttle )
	$20,571 (2017 hydro )

New Holland Workmaster 35 Engine
LS Mitron 1.9L 3-cyl diesel
Fuel tank	7.4 gal 28.0 L
Engine details ...

New Holland Workmaster 35 Power
Engine	35 hp 26.1 kW
Gear PTO (claimed)	29.7 hp 22.1 kW
Hydro PTO (claimed)	28 hp 20.9 kW

Mechanical
Four-wheel drive
Differential lock	mechanical rear
Power steering
Wet disc brakes
Two-post folding ROPS.

Hydraulics
Type	open center
Valves	1 or 2
Pump flow	8.2 gpm 31.0 lpm
Gear Total flow	12.4 gpm 46.9 lpm
Hydro Total flow	13.5 gpm 51.1 lpm
Gear Steering flow	4.2 gpm 15.9 lpm
Hydro Steering flow	5.3 gpm 20.1 lpm

Tractor hitch
Rear Type	I
Control	position control
Rear lift (at ends)	1808 lbs 820 kg
Rear lift (at 24"/610mm)	1433 lbs 650 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540 (1.375)

Dimensions & Tires
Wheelbase	67.5 inches 171 cm
Weight	3067 lbs 1391 kg
Front tire	7x14
Rear tire	11.2x24
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	70
Battery volts	12

References

Under 60-HP Tractors published in 2017, by New Holland

Engine

Engine Detail — 114.7 ci / 1.9 L Diesel

Manufacturer	LS Mitron L3C19-T
Configuration	turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	114.7 ci 1.9 L
Bore/Stroke	3.465x4.055 inches 88 x 103 mm
Emissions	Tier IV
Emission control	exhaust gas recirculation with particulate catalyst
Power	35 hp 26.1 kW
Fuel system	electronic common rail direct injection
Pre-heating	glow plugs
Rated RPM	2600
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed synchronized shuttle
hydrostatic

Transmission — 12 forward and reverse synchronized shuttle

Type	synchronized shuttle
Gears	12 forward and reverse
Four gears in three ranges with mechanical shuttle

Transmission — infinite forward and reverse (3-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (3-range)

Dimensions

New Holland Workmaster 35 Tires
Standard tires (ag)	Front: 7x14. Rear: 11.2x24
Lawn/turf front	25x8.50-14
Lawn/turf rear	41x14.00-20
Industrial front	25x8.5-14
Industrial rear	43x16.00-20

Dimensions
Wheelbase	67.5 inches 171 cm
Length	121 inches 307 cm
Width	66.5 inches 168 cm
Height (ROPS)	87.7 inches 222 cm
Weight	3067 lbs 1391 kg
Flange rear axle
Front tread	45.6 inches 115 cm
Rear tread	50.5 inches 128 cm

Attachments

Attachment overview
Mid-mount mower deck
Snowblower
Blade
Front-end loader
Backhoe

Mower deck
Type	mid-mount New Holland 366GMS

New Holland 925GHB Backhoe
Backhoe type	New Holland 925GHB Backhoe
Weight	722 lbs 327 kg
Transport height	77 inches 195 cm
Digging depth	92 inches 233 cm
Reach from pivot	120 inches 304 cm
Loading height	70 inches 177 cm
Bucket Rotation	174°
Swing Arc	175°
Bucket force	3151 lbs 1429 kg
Dipperstick force	2059 lbs 933 kg

Photos

New Holland Workmaster 35 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland Workmaster 35 based on its 35 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland Workmaster 35.

Estimated Continuous Field Runtime: 4.1 hrs

Approximately 4.1 hours of continuous field operation at ~75% rated power on a full tank (7.4 gal / 28 L).

Estimated 75% Load Fuel Burn~1.8 gal/hr (6.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours