Rhino 1210
The Rhino 1210 is a tractor produced by Rhino. It is equipped with a 55 ci 0.9 L engine. The listed engine power is Diesel (listed): 18 hp / 13.4 kW. Transmission: 12 forward and 4 reverse. Operating weight: 2360 lbs 1070 kg.
Engine Power
Diesel (listed): 18 hp / 13.4 kW
Fuel & Capacities
5.6 gal
21.2 L
Transmission
12 forward and 4 reverse
Operating Weight
2360 lbs
1070 kg
Overview
 | 1995 - 1999
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Rhino |
Compact Utility tractor | |
Built in China | |
Variants | |
|---|---|
1210 | 2WD |
Rhino 1210 Engine | |
|---|---|
0.9L 1-cyl diesel | |
Fuel tank | 5.6 gal
21.2 L |
Engine details ...  | |
Rhino 1210 Transmission | |
|---|---|
12-speed gear | |
Transmission details ...  |
Rhino 1210 Power | |
|---|---|
Engine | 18 hp
13.4 kW |
PTO (claimed) | 16 hp
11.9 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Power steering | |
Mechanical drum brakes | |
Two-post fixed ROPS. |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 6.4 gpm
24.2 lpm |
Steering flow | 3.7 gpm
14.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position control |
Rear lift (at 24"/610mm) | 1200 lbs
544 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | live |
Rear PTO Type | 540 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 50.5 inches
128 cm |
Weight | 2360 lbs
1070 kg |
Front tire | 4.0x14 |
Rear tire | 8.3x20 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
1210 - 1214 - 2220 - 2224 published in 1995, by Rhino |
Engine
Engine Detail — 55 ci / 0.9 L Diesel
Fuel Type | Diesel |
Configuration | 1-cylinder |
Displacement | 55 ci
0.9 L |
Power | 18 hp
13.4 kW |
Rated RPM | 2300 |
Starter volts | 12 |
Transmission
Transmission — 12 forward and 4 reverse gear
Type | gear |
Gears | 12 forward and 4 reverse |
Clutch | 228.6mm dry disc |
Dimensions
Rhino 1210 Tires | |
|---|---|
Standard tires (ag) | Front: 4.0x14. Rear: 8.3x20 |
Dimensions | |
|---|---|
Wheelbase | 50.5 inches
128 cm |
Length | 90 inches
228 cm |
Width | 50.5 inches
128 cm |
Height (ROPS) | 80.5 inches
204 cm |
Weight | 2360 lbs
1070 kg |
Clearance (front axle) | 10 inches
25 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Rhino 1210 based on its 18 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Rhino 1210.
Estimated Continuous Field Runtime: 6 hrs
Approximately 6 hours of continuous field operation at ~75% rated power on a full tank (5.6 gal / 21.2 L).
Estimated 75% Load Fuel Burn~0.9 gal/hr (3.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Rhino 1210 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Rhino 1210.
Converted Equivalents:
Horsepower (HP)18 hp
Kilowatts (kW)13.4 kW
Metric Horsepower (PS / CV)18.2 PS
Direct Competitor Comparison
Compare Rhino 1210 against same-era industry alternatives in the same horsepower class.
Current Model
Rhino
Rhino 1210
Engine Power:Diesel (listed): 18 hp / 13.4 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester Type A 15HP
Engine Power:16.7
Production Years:1908 - 1911
Related models
Rhino 162
- Power:
- 16
Rhino 1212
- Power:
- 18
- Production years:
- 1995 - 1999
Rhino 182
- Power:
- 18
Rhino 184
- Power:
- 18
Rhino 202
- Power:
- 20