Shibaura SE1640
The Shibaura SE1640 is a tractor produced by Shibaura. It is equipped with a 49.1 ci 0.8 L engine. The listed engine power is Diesel (listed): 16 hp / 11.9 kW. Transmission: 12 forward and 4 reverse. Operating weight: 1775 lbs 805 kg.
Engine Power
Diesel (listed): 16 hp / 11.9 kW
Fuel & Capacities
5.8 gal
22.0 L
Transmission
12 forward and 4 reverse
Operating Weight
1775 lbs
805 kg
Overview
 | Compact Utility tractor | Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Shibaura |
Compact Utility tractor | |
Variants | |
|---|---|
SE1600 | 2WD |
SE1640 | 4WD |
Shibaura SE1640 Engine | |
|---|---|
Shibaura 0.8L 2-cyl diesel | |
Engine details ...  |
Shibaura SE1640 Transmission | |
|---|---|
12-speed gear | |
Transmission details ...  |
Shibaura SE1640 Power | |
|---|---|
Engine | 16 hp
11.9 kW |
PTO (claimed) | 13.5 hp
10.1 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Mechanical drum brakes | |
Open operator station. |
Capacity | |
|---|---|
Fuel | 5.8 gal
22.0 L |
Hydraulic system | 5.3 gal
20.1 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 5.3 gal
20.1 L |
Pressure | 2133 psi
147.1 bar |
Valves | 1 |
Pump flow | 4.3 gpm
16.3 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position control |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 566@2700 |
719@2700 | |
929@2700 | |
1411@2700 | |
Dimensions & Tires | |
|---|---|
Weight | 1775 lbs
805 kg |
Front tire | 6.00x14 |
Rear tire | 8.3x24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 49.1 ci / 0.8 L Diesel
Manufacturer | Shibaura LEK 802D |
Fuel Type | Diesel |
Configuration | 2-cylinder, liquid-cooled |
Displacement | 49.1 ci
0.8 L |
Bore/Stroke | 3.15x3.15 inches
80 x 80 mm |
Power | 16 hp
11.9 kW |
Compression | 23.1:1 |
Rated RPM | 2700 |
Torque | 32.9 lb-ft
44.6 Nm |
Torque RPM | 1800 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 12 forward and 4 reverse gear
Type | gear |
Gears | 12 forward and 4 reverse |
Clutch | dry disc |
With 8.3x24 rear tires. | |
 | |
Dimensions
Shibaura SE1640 Tires | |
|---|---|
Ag front | 6.00x14 |
Ag rear | 8.3x24 |
Dimensions | |
|---|---|
Length | 105.6 inches
268 cm |
Width | 50 inches
127 cm |
Height (steering wheel) | 53.4 inches
135 cm |
Weight | 1775 lbs
805 kg |
Max weight | 4575 lbs
2075 kg |
Front tread | 39.8 inches
101 cm |
Rear tread | 41.2 to 52.1 inches
104 to 132 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Shibaura SE1640 based on its 16 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Shibaura SE1640.
Estimated Continuous Field Runtime: 7 hrs
Approximately 7 hours of continuous field operation at ~75% rated power on a full tank (5.8 gal / 22 L).
Estimated 75% Load Fuel Burn~0.8 gal/hr (3.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Shibaura SE1640 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Shibaura SE1640.
Converted Equivalents:
Horsepower (HP)16 hp
Kilowatts (kW)11.9 kW
Metric Horsepower (PS / CV)16.2 PS
Direct Competitor Comparison
Compare Shibaura SE1640 against same-era industry alternatives in the same horsepower class.
Current Model
Shibaura
Shibaura SE1640
Engine Power:Diesel (listed): 16 hp / 11.9 kW
★ Baseline Reference
Related models
Shibaura SD1300
- Power:
- 12.8
Shibaura SE1300
- Power:
- 13
Shibaura SE1340
- Power:
- 13
Shibaura SU1301
- Power:
- 13
- Production years:
- 1976 - 1986
Shibaura SU1341
- Power:
- 13
- Production years:
- 1976 - 1986