Steiger Panther CP-1360

The Steiger Panther CP-1360 is a tractor produced by Steiger. It is equipped with a 893 ci 14.6 L engine. The listed engine power is Diesel (listed): 360 hp / 268.5 kW. Transmission: 12 forward and 2 reverse. Operating weight: 35,300 lbs 16012 kg.

Engine Power

Diesel (listed): 360 hp / 268.5 kW

Fuel & Capacities

230 gal 870.6 L

Transmission

12 forward and 2 reverse

Operating Weight

35,300 lbs 16012 kg

Overview

	1982 - 1985 1000 SeriesFour-wheel Drive (4WD) tractor 1000 Series Four-wheel Drive (4WD) tractor

Production
Manufacturer	Steiger
Four-wheel Drive (4WD) tractor
Built in Fargo, North Dakota, USA
Original price was $136,000 in 1985

Variants
CP-1325	Caterpillar 325HP
KP-1325	Cummins 325HP
CP-1360	Caterpillar 360HP
KP-1360	Cummins 360HP
CP-1400	Caterpillar 400HP
KP-1400	Cummins 400HP

Steiger Panther CP-1360 Engine
Caterpillar 14.6L 6-cyl diesel
Fuel tank	230 gal 870.6 L
Engine details ...

Steiger Panther CP-1360 Transmission
12-speed full power shift
Transmission details ...

Steiger Panther CP-1360 Power
Engine	360 hp 268.5 kW
Drawbar (tested)	289.91 hp 216.2 kW
PTO (tested)	334.33 hp 249.3 kW
Performance test details ...

Mechanical
Four-wheel drive
Final drives	outboard planetary
Articulated power steering
Hydraulic disc brakes
Cab standard with air-conditioning.

Hydraulics
Type	closed center
Valves	3

Tractor hitch
Rear Type	III/IV

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	1000

Dimensions & Tires
Wheelbase	141.5 inches 359 cm
Weight	35,300 lbs 16012 kg
Front tire	23.1-34
Rear tire	23.1-34
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

References

Utility Farmall A Series Tractors published in 2017, by CaseIH
The Steiger Line published in 1983

Engine

Engine Detail — 893 ci / 14.6 L Diesel

Manufacturer	Caterpillar 3406
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled
Displacement	893 ci 14.6 L
Bore/Stroke	5.40x6.50 inches 137 x 165 mm
Power	360 hp 268.5 kW
Air cleaner	dual dry element
Compression	14.5:1
Rated RPM	2100
Starter	electric
Starter volts	12

Transmission

Transmission — 12 forward and 2 reverse full power shift

Type	full power shift
Gears	12 forward and 2 reverse
Clutch	electro-hydraulic wet disc

Dimensions

Steiger Panther CP-1360 Tires
Ag front	23.1-34
Ag rear	23.1-34

Dimensions
Wheelbase	141.5 inches 359 cm
Weight	35,300 lbs 16012 kg

Tests

Nebraska Tractor Test 1455
Diesel 12-speed 4WD September 20 - October 9, 1982 Link: Nebraska Tractor Test 1455 file
PTO performance
Power at rated engine speed	334.33 hp 249.3 kW
Fuel use	20.0 gal/hour 75.7 l/hour
Drawbar performance
Max power	289.91 hp 216.2 kW
Fuel use	14.6 gal/hour 55.3 l/hour
Gear 7 used for power test.
Max pull	36123 lbs 16385 kg
Gear 2 used for pull test.

Photos

Steiger Panther CP-1360

Recommended Implements & Sizing Guide

Engineering recommendations for Steiger Panther CP-1360 based on its 360 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Steiger Panther CP-1360.

Estimated Continuous Field Runtime: 12.3 hrs

Approximately 12.3 hours of continuous field operation at ~75% rated power on a full tank (230 gal / 870.6 L).

Estimated 75% Load Fuel Burn~18.7 gal/hr (70.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours